[PATCH 2/2] arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY

[Dmitry Baryshkov]

The SuperSpeed signals originate from the DWC3 host controller and then
are routed through the Combo QMP PHY, where they are multiplexed with
the DisplayPort signals. Add corresponding OF graph link.

Reported-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index d57039a4c3aa..e551e733ab94 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3917,6 +3917,10 @@ port@0 {
 
 				port@1 {
 					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss_out>;
+					};
 				};
 
 				port@2 {
@@ -4195,8 +4199,24 @@ usb_1_dwc3: usb@a600000 {
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
-				port {
-					usb_1_dwc3_hs_out: endpoint {};
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs_out: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss_out: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+						};
+					};
 				};
 			};
 		};

-- 
2.39.2