Re: [PATCH 53/64] i2c: st: reword according to newest specification

[Easwar Hariharan]

On 3/22/2024 6:25 AM, Wolfram Sang wrote:
> Match the wording of this driver wrt. the newest I2C v7, SMBus 3.2, I3C
> specifications and replace "master/slave" with more appropriate terms.
> They are also more specific because we distinguish now between a remote
> entity ("client") and a local one ("target").
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-st.c | 17 +++++++----------
>  1 file changed, 7 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
> index ce2333408904..9bd45ae83c0c 100644
> --- a/drivers/i2c/busses/i2c-st.c
> +++ b/drivers/i2c/busses/i2c-st.c
> @@ -2,7 +2,7 @@
>  /*
>   * Copyright (C) 2013 STMicroelectronics
>   *
> - * I2C master mode controller driver, used in STMicroelectronics devices.
> + * I2C host controller driver, used in STMicroelectronics devices.
>   *
>   * Author: Maxime Coquelin <maxime.coquelin@xxxxxx>
>   */
> @@ -150,7 +150,7 @@ struct st_i2c_timings {
>  
>  /**
>   * struct st_i2c_client - client specific data
> - * @addr: 8-bit slave addr, including r/w bit
> + * @addr: 8-bit client addr, including r/w bit
>   * @count: number of bytes to be transfered
>   * @xfered: number of bytes already transferred
>   * @buf: data buffer
> @@ -647,7 +647,7 @@ static int st_i2c_xfer_msg(struct st_i2c_dev *i2c_dev, struct i2c_msg *msg,
>  {
>  	struct st_i2c_client *c = &i2c_dev->client;
>  	u32 ctl, i2c, it;
> -	unsigned long timeout;
> +	unsigned long time_left;

Thanks for doing this. Is the timeout v/s time_left language also due to the specification change?
A link to the specification(s) in the commit message would be nice to have

>  	int ret;
>  
>  	c->addr		= i2c_8bit_addr_from_msg(msg);
> @@ -667,7 +667,7 @@ static int st_i2c_xfer_msg(struct st_i2c_dev *i2c_dev, struct i2c_msg *msg,
>  		i2c |= SSC_I2C_ACKG;
>  	st_i2c_set_bits(i2c_dev->base + SSC_I2C, i2c);
>  
> -	/* Write slave address */
> +	/* Write client address */
>  	st_i2c_write_tx_fifo(i2c_dev, c->addr);
>  
>  	/* Pre-fill Tx fifo with data in case of write */
> @@ -685,15 +685,12 @@ static int st_i2c_xfer_msg(struct st_i2c_dev *i2c_dev, struct i2c_msg *msg,
>  		st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_STRTG);
>  	}
>  
> -	timeout = wait_for_completion_timeout(&i2c_dev->complete,
> +	time_left = wait_for_completion_timeout(&i2c_dev->complete,
>  			i2c_dev->adap.timeout);
>  	ret = c->result;
>  
> -	if (!timeout) {
> -		dev_err(i2c_dev->dev, "Write to slave 0x%x timed out\n",
> -				c->addr);
> +	if (!time_left)
>  		ret = -ETIMEDOUT;
> -	}

Why did we lost the dev_err() here?

>  
>  	i2c = SSC_I2C_STOPG | SSC_I2C_REPSTRTG;
>  	st_i2c_clr_bits(i2c_dev->base + SSC_I2C, i2c);
> @@ -769,7 +766,7 @@ static u32 st_i2c_func(struct i2c_adapter *adap)
>  }
>  
>  static const struct i2c_algorithm st_i2c_algo = {
> -	.master_xfer = st_i2c_xfer,
> +	.xfer = st_i2c_xfer,
>  	.functionality = st_i2c_func,
>  };
>