Re: [PATCH RESEND v8 09/10] watchdog: rzg2l_wdt: Power on the PM domain in rzg2l_wdt_restart()

From: Ulf Hansson
Date: Fri Apr 12 2024 - 07:15:35 EST


On Wed, 10 Apr 2024 at 16:19, Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
>
> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>
> The rzg2l_wdt_restart() is called from atomic context. Calling
> pm_runtime_{get_sync, resume_and_get}() or any other runtime PM resume
> APIs is not an option as it may lead to issues as described in commit
> e4cf89596c1f ("watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait context'")
> that removed the pm_runtime_get_sync() and used directly the
> clk_prepare_enable() APIs.
>
> Starting with RZ/G3S the watchdog could be part of its own software
> controlled power domain (see the initial implementation in Link section).
> In case the watchdog is not used the power domain is off and accessing
> watchdog registers leads to aborts.
>
> To solve this the patch powers on the power domain using
> dev_pm_genpd_resume() API before enabling its clock. This is not
> sleeping or taking any other locks as the power domain will not be
> registered with GENPD_FLAG_IRQ_SAFE flags.
>
> Link: https://lore.kernel.org/all/20240208124300.2740313-1-claudiu.beznea.uj@xxxxxxxxxxxxxx
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> ---
>
> Changes in v8:
> - none, this patch is new
>
> drivers/watchdog/rzg2l_wdt.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/watchdog/rzg2l_wdt.c b/drivers/watchdog/rzg2l_wdt.c
> index c8c20cfb97a3..98e5e9914a5d 100644
> --- a/drivers/watchdog/rzg2l_wdt.c
> +++ b/drivers/watchdog/rzg2l_wdt.c
> @@ -12,6 +12,7 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> #include <linux/pm_runtime.h>
> #include <linux/reset.h>
> #include <linux/units.h>
> @@ -164,6 +165,17 @@ static int rzg2l_wdt_restart(struct watchdog_device *wdev,
> struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
> int ret;
>
> + /*
> + * The device may be part of a power domain that is currently
> + * powered off. We need to power it up before accessing registers.
> + * We don't undo the dev_pm_genpd_resume() as the device need to
> + * be up for the reboot to happen. Also, as we are in atomic context
> + * here there is no need to increment PM runtime usage counter
> + * (to make sure pm_runtime_active() doesn't return wrong code).
> + */
> + if (!pm_runtime_active(wdev->parent))
> + dev_pm_genpd_resume(wdev->parent);
> +

I doubt this is the correct solution, but I may be wrong. Unless this
is invoked at the syscore stage?

> clk_prepare_enable(priv->pclk);
> clk_prepare_enable(priv->osc_clk);
>
> --
> 2.39.2
>
>

Can you redirectly me to the complete series, so I can have a better
overview of the problem?

Kind regards
Uffe