Re: [RFC PATCH 23/41] KVM: x86/pmu: Implement the save/restore of PMU state for Intel CPU
From: Mi, Dapeng
Date: Fri Apr 12 2024 - 23:04:03 EST
On 4/12/2024 5:44 AM, Sean Christopherson wrote:
On Fri, Jan 26, 2024, Xiong Zhang wrote:
From: Dapeng Mi <dapeng1.mi@xxxxxxxxxxxxxxx>
Implement the save/restore of PMU state for pasthrough PMU in Intel. In
passthrough mode, KVM owns exclusively the PMU HW when control flow goes to
the scope of passthrough PMU. Thus, KVM needs to save the host PMU state
and gains the full HW PMU ownership. On the contrary, host regains the
ownership of PMU HW from KVM when control flow leaves the scope of
passthrough PMU.
Implement PMU context switches for Intel CPUs and opptunistically use
rdpmcl() instead of rdmsrl() when reading counters since the former has
lower latency in Intel CPUs.
Co-developed-by: Mingwei Zhang <mizhang@xxxxxxxxxx>
Signed-off-by: Mingwei Zhang <mizhang@xxxxxxxxxx>
Signed-off-by: Dapeng Mi <dapeng1.mi@xxxxxxxxxxxxxxx>
---
arch/x86/kvm/vmx/pmu_intel.c | 73 ++++++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/arch/x86/kvm/vmx/pmu_intel.c b/arch/x86/kvm/vmx/pmu_intel.c
index 0d58fe7d243e..f79bebe7093d 100644
--- a/arch/x86/kvm/vmx/pmu_intel.c
+++ b/arch/x86/kvm/vmx/pmu_intel.c
@@ -823,10 +823,83 @@ void intel_passthrough_pmu_msrs(struct kvm_vcpu *vcpu)
static void intel_save_pmu_context(struct kvm_vcpu *vcpu)
I would prefer there be a "guest" in there somewhere, e.g. intel_save_guest_pmu_context().
Yeah. It looks clearer.
{
+ struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
+ struct kvm_pmc *pmc;
+ u32 i;
+
+ if (pmu->version != 2) {
+ pr_warn("only PerfMon v2 is supported for passthrough PMU");
+ return;
+ }
+
+ /* Global ctrl register is already saved at VM-exit. */
+ rdmsrl(MSR_CORE_PERF_GLOBAL_STATUS, pmu->global_status);
+ /* Clear hardware MSR_CORE_PERF_GLOBAL_STATUS MSR, if non-zero. */
+ if (pmu->global_status)
+ wrmsrl(MSR_CORE_PERF_GLOBAL_OVF_CTRL, pmu->global_status);
+
+ for (i = 0; i < pmu->nr_arch_gp_counters; i++) {
+ pmc = &pmu->gp_counters[i];
+ rdpmcl(i, pmc->counter);
+ rdmsrl(i + MSR_ARCH_PERFMON_EVENTSEL0, pmc->eventsel);
+ /*
+ * Clear hardware PERFMON_EVENTSELx and its counter to avoid
+ * leakage and also avoid this guest GP counter get accidentally
+ * enabled during host running when host enable global ctrl.
+ */
+ if (pmc->eventsel)
+ wrmsrl(MSR_ARCH_PERFMON_EVENTSEL0 + i, 0);
+ if (pmc->counter)
+ wrmsrl(MSR_IA32_PMC0 + i, 0);
This doesn't make much sense. The kernel already has full access to the guest,
I don't see what is gained by zeroing out the MSRs just to hide them from perf.
It's necessary to clear the EVENTSELx MSRs for both GP and fixed
counters. Considering this case, Guest uses GP counter 2, but Host
doesn't use it. So if the EVENTSEL2 MSR is not cleared here, the GP
counter 2 would be enabled unexpectedly on host later since Host perf
always enable all validate bits in PERF_GLOBAL_CTRL MSR. That would
cause issues.
Yeah, the clearing for PMCx MSR should be unnecessary .
Similarly, if perf enables a counter if PERF_GLOBAL_CTRL without first restoring
the event selector, we gots problems.
Same thing for the fixed counters below. Can't this just be?
for (i = 0; i < pmu->nr_arch_gp_counters; i++)
rdpmcl(i, pmu->gp_counters[i].counter);
for (i = 0; i < pmu->nr_arch_fixed_counters; i++)
rdpmcl(INTEL_PMC_FIXED_RDPMC_BASE | i,
pmu->fixed_counters[i].counter);
+ }
+
+ rdmsrl(MSR_CORE_PERF_FIXED_CTR_CTRL, pmu->fixed_ctr_ctrl);
+ /*
+ * Clear hardware FIXED_CTR_CTRL MSR to avoid information leakage and
+ * also avoid these guest fixed counters get accidentially enabled
+ * during host running when host enable global ctrl.
+ */
+ if (pmu->fixed_ctr_ctrl)
+ wrmsrl(MSR_CORE_PERF_FIXED_CTR_CTRL, 0);
+ for (i = 0; i < pmu->nr_arch_fixed_counters; i++) {
+ pmc = &pmu->fixed_counters[i];
+ rdpmcl(INTEL_PMC_FIXED_RDPMC_BASE | i, pmc->counter);
+ if (pmc->counter)
+ wrmsrl(MSR_CORE_PERF_FIXED_CTR0 + i, 0);
+ }
}
static void intel_restore_pmu_context(struct kvm_vcpu *vcpu)
{
+ struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
+ struct kvm_pmc *pmc;
+ u64 global_status;
+ int i;
+
+ if (pmu->version != 2) {
+ pr_warn("only PerfMon v2 is supported for passthrough PMU");
+ return;
+ }
+
+ /* Clear host global_ctrl and global_status MSR if non-zero. */
+ wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0);
Why? PERF_GLOBAL_CTRL will be auto-loaded at VM-Enter, why do it now?
As previous comments say, host perf always enable all counters in
PERF_GLOBAL_CTRL by default. The reason to clear PERF_GLOBAL_CTRL here
is to ensure all counters in disabled state and the later counter
manipulation (writing MSR) won't cause any race condition or unexpected
behavior on HW.
+ rdmsrl(MSR_CORE_PERF_GLOBAL_STATUS, global_status);
+ if (global_status)
+ wrmsrl(MSR_CORE_PERF_GLOBAL_OVF_CTRL, global_status);
This seems especially silly, isn't the full MSR being written below? Or am I
misunderstanding how these things work?
I think Jim's comment has already explain why we need to do this.
+ wrmsrl(MSR_CORE_PERF_GLOBAL_STATUS_SET, pmu->global_status);
+
+ for (i = 0; i < pmu->nr_arch_gp_counters; i++) {
+ pmc = &pmu->gp_counters[i];
+ wrmsrl(MSR_IA32_PMC0 + i, pmc->counter);
+ wrmsrl(MSR_ARCH_PERFMON_EVENTSEL0 + i, pmc->eventsel);
+ }
+
+ wrmsrl(MSR_CORE_PERF_FIXED_CTR_CTRL, pmu->fixed_ctr_ctrl);
+ for (i = 0; i < pmu->nr_arch_fixed_counters; i++) {
+ pmc = &pmu->fixed_counters[i];
+ wrmsrl(MSR_CORE_PERF_FIXED_CTR0 + i, pmc->counter);
+ }
}
struct kvm_pmu_ops intel_pmu_ops __initdata = {
--
2.34.1