Re: [PATCH v3 6/7] phy: qcom-qmp-pcie: add support for ipq9574 gen3x2 PHY

[Dmitry Baryshkov]

On Mon, 15 Apr 2024 at 21:23, Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx> wrote:
>
> Add support for the gen3x2 PCIe PHY on IPQ9574, ported form downstream
> 5.4 kernel. Only the serdes and pcs_misc tables are new, the others
> being reused from IPQ8074 and IPQ6018 PHYs.
>
> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-pcie.c      | 136 +++++++++++++++++-
>  .../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h   |  14 ++
>  2 files changed, 149 insertions(+), 1 deletion(-)
>

[skipped]

> @@ -2448,7 +2542,7 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
>
>  /* list of clocks required by phy */
>  static const char * const qmp_pciephy_clk_l[] = {
> -       "aux", "cfg_ahb", "ref", "refgen", "rchng", "phy_aux",
> +       "aux", "cfg_ahb", "ref", "refgen", "rchng", "phy_aux", "anoc", "snoc"

Are the NoC clocks really necessary to drive the PHY? I think they are
usually connected to the controllers, not the PHYs.

>  };
>
>  /* list of regulators */
> @@ -2499,6 +2593,16 @@ static const struct qmp_pcie_offsets qmp_pcie_offsets_v4x1 = {
>         .rx             = 0x0400,
>  };
>
> +static const struct qmp_pcie_offsets qmp_pcie_offsets_ipq9574 = {
> +       .serdes         = 0,
> +       .pcs            = 0x1000,
> +       .pcs_misc       = 0x1400,
> +       .tx             = 0x0200,
> +       .rx             = 0x0400,
> +       .tx2            = 0x0600,
> +       .rx2            = 0x0800,
> +};
> +
>  static const struct qmp_pcie_offsets qmp_pcie_offsets_v4x2 = {
>         .serdes         = 0,
>         .pcs            = 0x0a00,
> @@ -2728,6 +2832,33 @@ static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
>         .phy_status             = PHYSTATUS,
>  };
>
> +static const struct qmp_phy_cfg ipq9574_pciephy_gen3x2_cfg = {
> +       .lanes                  = 2,
> +
> +       .offsets                = &qmp_pcie_offsets_ipq9574,
> +
> +       .tbls = {
> +               .serdes         = ipq9574_gen3x2_pcie_serdes_tbl,
> +               .serdes_num     = ARRAY_SIZE(ipq9574_gen3x2_pcie_serdes_tbl),
> +               .tx             = ipq8074_pcie_gen3_tx_tbl,
> +               .tx_num         = ARRAY_SIZE(ipq8074_pcie_gen3_tx_tbl),
> +               .rx             = ipq6018_pcie_rx_tbl,
> +               .rx_num         = ARRAY_SIZE(ipq6018_pcie_rx_tbl),
> +               .pcs            = ipq6018_pcie_pcs_tbl,
> +               .pcs_num        = ARRAY_SIZE(ipq6018_pcie_pcs_tbl),
> +               .pcs_misc       = ipq9574_gen3x2_pcie_pcs_misc_tbl,
> +               .pcs_misc_num   = ARRAY_SIZE(ipq9574_gen3x2_pcie_pcs_misc_tbl),
> +       },
> +       .reset_list             = ipq8074_pciephy_reset_l,
> +       .num_resets             = ARRAY_SIZE(ipq8074_pciephy_reset_l),
> +       .vreg_list              = NULL,
> +       .num_vregs              = 0,
> +       .regs                   = pciephy_v4_regs_layout,

So, is it v4 or v5?


> +
> +       .pwrdn_ctrl             = SW_PWRDN | REFCLK_DRV_DSBL,
> +       .phy_status             = PHYSTATUS,
> +};
> +
>  static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
>         .lanes                  = 2,
>



--
With best wishes
Dmitry