On Mon, 15 Apr 2024 at 21:23, Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx> wrote:
Add support for the gen3x2 PCIe PHY on IPQ9574, ported form downstream
5.4 kernel. Only the serdes and pcs_misc tables are new, the others
being reused from IPQ8074 and IPQ6018 PHYs.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 136 +++++++++++++++++-
.../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h | 14 ++
2 files changed, 149 insertions(+), 1 deletion(-)
[skipped]
@@ -2448,7 +2542,7 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
/* list of clocks required by phy */
static const char * const qmp_pciephy_clk_l[] = {
- "aux", "cfg_ahb", "ref", "refgen", "rchng", "phy_aux",
+ "aux", "cfg_ahb", "ref", "refgen", "rchng", "phy_aux", "anoc", "snoc"
Are the NoC clocks really necessary to drive the PHY? I think they are
usually connected to the controllers, not the PHYs.
};
/* list of regulators */
@@ -2499,6 +2593,16 @@ static const struct qmp_pcie_offsets qmp_pcie_offsets_v4x1 = {
.rx = 0x0400,
};
+static const struct qmp_pcie_offsets qmp_pcie_offsets_ipq9574 = {
+ .serdes = 0,
+ .pcs = 0x1000,
+ .pcs_misc = 0x1400,
+ .tx = 0x0200,
+ .rx = 0x0400,
+ .tx2 = 0x0600,
+ .rx2 = 0x0800,
+};
+
static const struct qmp_pcie_offsets qmp_pcie_offsets_v4x2 = {
.serdes = 0,
.pcs = 0x0a00,
@@ -2728,6 +2832,33 @@ static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
.phy_status = PHYSTATUS,
};
+static const struct qmp_phy_cfg ipq9574_pciephy_gen3x2_cfg = {
+ .lanes = 2,
+
+ .offsets = &qmp_pcie_offsets_ipq9574,
+
+ .tbls = {
+ .serdes = ipq9574_gen3x2_pcie_serdes_tbl,
+ .serdes_num = ARRAY_SIZE(ipq9574_gen3x2_pcie_serdes_tbl),
+ .tx = ipq8074_pcie_gen3_tx_tbl,
+ .tx_num = ARRAY_SIZE(ipq8074_pcie_gen3_tx_tbl),
+ .rx = ipq6018_pcie_rx_tbl,
+ .rx_num = ARRAY_SIZE(ipq6018_pcie_rx_tbl),
+ .pcs = ipq6018_pcie_pcs_tbl,
+ .pcs_num = ARRAY_SIZE(ipq6018_pcie_pcs_tbl),
+ .pcs_misc = ipq9574_gen3x2_pcie_pcs_misc_tbl,
+ .pcs_misc_num = ARRAY_SIZE(ipq9574_gen3x2_pcie_pcs_misc_tbl),
+ },
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = NULL,
+ .num_vregs = 0,
+ .regs = pciephy_v4_regs_layout,
So, is it v4 or v5?
+
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+};
+
static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
.lanes = 2,
--
With best wishes
Dmitry