[PATCH v3 3/8] serial: exar: added a exar_get_nr_ports function

[Parker Newman]

From: Parker Newman <pnewman@xxxxxxxxxxxxxxx>

Moved code for getting number of ports from exar_pci_probe() to a
separate exar_get_nr_ports() function.

Chnages in v3:
- Only moved existing code in this patch, will add CTI code in subsequent
  patch

Signed-off-by: Parker Newman <pnewman@xxxxxxxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_exar.c | 27 +++++++++++++++++++++------
 1 file changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 3565b880f512..388dd60ad23a 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -703,6 +703,21 @@ static irqreturn_t exar_misc_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }

+static unsigned int exar_get_nr_ports(struct exar8250_board *board,
+					struct pci_dev *pcidev)
+{
+	unsigned int nr_ports = 0;
+
+	if (pcidev->vendor == PCI_VENDOR_ID_ACCESSIO)
+		nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1);
+	else if (board->num_ports)
+		nr_ports = board->num_ports;
+	else
+		nr_ports = pcidev->device & 0x0f;
+
+	return nr_ports;
+}
+
 static int
 exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
 {
@@ -722,12 +737,12 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)

 	maxnr = pci_resource_len(pcidev, bar) >> (board->reg_shift + 3);

-	if (pcidev->vendor == PCI_VENDOR_ID_ACCESSIO)
-		nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1);
-	else if (board->num_ports)
-		nr_ports = board->num_ports;
-	else
-		nr_ports = pcidev->device & 0x0f;
+	nr_ports = exar_get_nr_ports(board, pcidev);
+	if (nr_ports == 0) {
+		dev_err_probe(&pcidev->dev, -ENODEV,
+				"failed to get number of ports\n");
+		return -ENODEV;
+	}

 	priv = devm_kzalloc(&pcidev->dev, struct_size(priv, line, nr_ports), GFP_KERNEL);
 	if (!priv)
--
2.43.2