[PATCH v4 5/5] regulator: rk808: Add RK816 support

From: Alex Bee
Date: Tue Apr 16 2024 - 12:14:24 EST

Next message: Dave Martin: "Re: [PATCH v1 01/31] x86/resctrl: Fix allocation of cleanest CLOSID on platforms with no monitors"
Previous message: Anna-Maria Behnsen: "Re: [patch V2 20/50] posix-timers: Consolidate timer setup"
In reply to: Mark Brown: "Re: [PATCH v4 4/5] regulator: rk808: Support apply_bit for rk808_set_suspend_voltage_range"
Next in thread: Mark Brown: "Re: [PATCH v4 5/5] regulator: rk808: Add RK816 support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Add support for rk816 to the existing rk808 regulator driver.

The infrastructure of the driver can be re-used as is. A peculiarity for
this version is, that BUCK1/BUCK2 have a (common) bit which needs to
toggled after a voltage change to confirm the change. Regulator regmap
takes care of that by defining a apply_bit and apply_reg for those
regulators.

Signed-off-by: Alex Bee <knaerzche@xxxxxxxxx>
---
changes since v1:
- align regulator's .name and .of_match with updated binding

changes since v2:
- align regulator's .name and .of_match with updated binding
(dropped "-regulator" prefix)

drivers/regulator/rk808-regulator.c | 202 +++++++++++++++++++++++++++-
1 file changed, 201 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index a6a563e402d0..14b60abd6afc 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -158,6 +158,11 @@
RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, 0, 0, _etime, &rk808_reg_ops)

+#define RK816_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask, _disval, _etime) \
+ RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask, _emask, _disval, _etime, &rk816_reg_ops)
+
#define RK817_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _disval, _etime) \
RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
@@ -258,7 +263,7 @@ static const unsigned int rk808_buck1_2_ramp_table[] = {
2000, 4000, 6000, 10000
};

-/* RK817 RK809 */
+/* RK817/RK809/RK816 (buck 1/2 only) */
static const unsigned int rk817_buck1_4_ramp_table[] = {
3000, 6300, 12500, 25000
};
@@ -640,6 +645,38 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
rdev->desc->enable_mask);
}

+static const struct rk8xx_register_bit rk816_suspend_bits[] = {
+ RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG1, 0),
+ RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG1, 1),
+ RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG1, 2),
+ RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG1, 3),
+ RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG2, 0),
+ RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG2, 1),
+ RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG2, 2),
+ RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG2, 3),
+ RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG2, 4),
+ RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG2, 5),
+ RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG1, 5),
+ RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG1, 6),
+};
+
+static int rk816_set_suspend_enable(struct regulator_dev *rdev)
+{
+ int rid = rdev_get_id(rdev);
+
+ return regmap_update_bits(rdev->regmap, rk816_suspend_bits[rid].reg,
+ rk816_suspend_bits[rid].bit,
+ rk816_suspend_bits[rid].bit);
+}
+
+static int rk816_set_suspend_disable(struct regulator_dev *rdev)
+{
+ int rid = rdev_get_id(rdev);
+
+ return regmap_update_bits(rdev->regmap, rk816_suspend_bits[rid].reg,
+ rk816_suspend_bits[rid].bit, 0);
+}
+
static int rk817_set_suspend_enable_ctrl(struct regulator_dev *rdev,
unsigned int en)
{
@@ -913,6 +950,54 @@ static const struct regulator_ops rk809_buck5_ops_range = {
.set_suspend_disable = rk817_set_suspend_disable,
};

+static const struct regulator_ops rk816_buck1_2_ops_ranges = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_mode = rk8xx_set_mode,
+ .get_mode = rk8xx_get_mode,
+ .set_suspend_mode = rk8xx_set_suspend_mode,
+ .set_ramp_delay = regulator_set_ramp_delay_regmap,
+ .set_suspend_voltage = rk808_set_suspend_voltage_range,
+ .set_suspend_enable = rk816_set_suspend_enable,
+ .set_suspend_disable = rk816_set_suspend_disable,
+};
+
+static const struct regulator_ops rk816_buck4_ops_ranges = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_mode = rk8xx_set_mode,
+ .get_mode = rk8xx_get_mode,
+ .set_suspend_mode = rk8xx_set_suspend_mode,
+ .set_suspend_voltage = rk808_set_suspend_voltage_range,
+ .set_suspend_enable = rk816_set_suspend_enable,
+ .set_suspend_disable = rk816_set_suspend_disable,
+};
+
+static const struct regulator_ops rk816_reg_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = rk8xx_is_enabled_wmsk_regmap,
+ .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_enable = rk816_set_suspend_enable,
+ .set_suspend_disable = rk816_set_suspend_disable,
+};
+
static const struct regulator_ops rk817_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
@@ -1392,6 +1477,117 @@ static const struct regulator_desc rk809_reg[] = {
DISABLE_VAL(3)),
};

+static const struct linear_range rk816_buck_4_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(800000, 0, 26, 100000),
+ REGULATOR_LINEAR_RANGE(3500000, 27, 31, 0),
+};
+
+static const struct regulator_desc rk816_reg[] = {
+ {
+ .name = "dcdc1",
+ .supply_name = "vcc1",
+ .of_match = of_match_ptr("dcdc1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK816_ID_DCDC1,
+ .ops = &rk816_buck1_2_ops_ranges,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 64,
+ .linear_ranges = rk805_buck_1_2_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
+ .vsel_reg = RK818_BUCK1_ON_VSEL_REG,
+ .vsel_mask = RK818_BUCK_VSEL_MASK,
+ .apply_reg = RK816_DCDC_EN_REG2,
+ .apply_bit = RK816_BUCK_DVS_CONFIRM,
+ .enable_reg = RK816_DCDC_EN_REG1,
+ .enable_mask = BIT(4) | BIT(0),
+ .enable_val = BIT(4) | BIT(0),
+ .disable_val = BIT(4),
+ .ramp_reg = RK818_BUCK1_CONFIG_REG,
+ .ramp_mask = RK808_RAMP_RATE_MASK,
+ .ramp_delay_table = rk817_buck1_4_ramp_table,
+ .n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
+ .of_map_mode = rk8xx_regulator_of_map_mode,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "dcdc2",
+ .supply_name = "vcc2",
+ .of_match = of_match_ptr("dcdc2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK816_ID_DCDC2,
+ .ops = &rk816_buck1_2_ops_ranges,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 64,
+ .linear_ranges = rk805_buck_1_2_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
+ .vsel_reg = RK818_BUCK2_ON_VSEL_REG,
+ .vsel_mask = RK818_BUCK_VSEL_MASK,
+ .apply_reg = RK816_DCDC_EN_REG2,
+ .apply_bit = RK816_BUCK_DVS_CONFIRM,
+ .enable_reg = RK816_DCDC_EN_REG1,
+ .enable_mask = BIT(5) | BIT(1),
+ .enable_val = BIT(5) | BIT(1),
+ .disable_val = BIT(5),
+ .ramp_reg = RK818_BUCK2_CONFIG_REG,
+ .ramp_mask = RK808_RAMP_RATE_MASK,
+ .ramp_delay_table = rk817_buck1_4_ramp_table,
+ .n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
+ .of_map_mode = rk8xx_regulator_of_map_mode,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "dcdc3",
+ .supply_name = "vcc3",
+ .of_match = of_match_ptr("dcdc3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK816_ID_DCDC3,
+ .ops = &rk808_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 1,
+ .enable_reg = RK816_DCDC_EN_REG1,
+ .enable_mask = BIT(6) | BIT(2),
+ .enable_val = BIT(6) | BIT(2),
+ .disable_val = BIT(6),
+ .of_map_mode = rk8xx_regulator_of_map_mode,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "dcdc4",
+ .supply_name = "vcc4",
+ .of_match = of_match_ptr("dcdc4"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK816_ID_DCDC4,
+ .ops = &rk816_buck4_ops_ranges,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 32,
+ .linear_ranges = rk816_buck_4_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk816_buck_4_voltage_ranges),
+ .vsel_reg = RK818_BUCK4_ON_VSEL_REG,
+ .vsel_mask = RK818_BUCK4_VSEL_MASK,
+ .enable_reg = RK816_DCDC_EN_REG1,
+ .enable_mask = BIT(7) | BIT(3),
+ .enable_val = BIT(7) | BIT(3),
+ .disable_val = BIT(7),
+ .of_map_mode = rk8xx_regulator_of_map_mode,
+ .owner = THIS_MODULE,
+ },
+ RK816_DESC(RK816_ID_LDO1, "ldo1", "vcc5", 800, 3400, 100,
+ RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+ RK816_LDO_EN_REG1, ENABLE_MASK(0), DISABLE_VAL(0), 400),
+ RK816_DESC(RK816_ID_LDO2, "ldo2", "vcc5", 800, 3400, 100,
+ RK818_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+ RK816_LDO_EN_REG1, ENABLE_MASK(1), DISABLE_VAL(1), 400),
+ RK816_DESC(RK816_ID_LDO3, "ldo3", "vcc5", 800, 3400, 100,
+ RK818_LDO3_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+ RK816_LDO_EN_REG1, ENABLE_MASK(2), DISABLE_VAL(2), 400),
+ RK816_DESC(RK816_ID_LDO4, "ldo4", "vcc6", 800, 3400, 100,
+ RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+ RK816_LDO_EN_REG1, ENABLE_MASK(3), DISABLE_VAL(3), 400),
+ RK816_DESC(RK816_ID_LDO5, "ldo5", "vcc6", 800, 3400, 100,
+ RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+ RK816_LDO_EN_REG2, ENABLE_MASK(0), DISABLE_VAL(0), 400),
+ RK816_DESC(RK816_ID_LDO6, "ldo6", "vcc6", 800, 3400, 100,
+ RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+ RK816_LDO_EN_REG2, ENABLE_MASK(1), DISABLE_VAL(1), 400),
+};
+
static const struct regulator_desc rk817_reg[] = {
{
.name = "DCDC_REG1",
@@ -1714,6 +1910,10 @@ static int rk808_regulator_probe(struct platform_device *pdev)
regulators = rk809_reg;
nregulators = RK809_NUM_REGULATORS;
break;
+ case RK816_ID:
+ regulators = rk816_reg;
+ nregulators = ARRAY_SIZE(rk816_reg);
+ break;
case RK817_ID:
regulators = rk817_reg;
nregulators = RK817_NUM_REGULATORS;
--
2.43.2

Next message: Dave Martin: "Re: [PATCH v1 01/31] x86/resctrl: Fix allocation of cleanest CLOSID on platforms with no monitors"
Previous message: Anna-Maria Behnsen: "Re: [patch V2 20/50] posix-timers: Consolidate timer setup"
In reply to: Mark Brown: "Re: [PATCH v4 4/5] regulator: rk808: Support apply_bit for rk808_set_suspend_voltage_range"
Next in thread: Mark Brown: "Re: [PATCH v4 5/5] regulator: rk808: Add RK816 support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]