[PATCH 1/7] drm/msm/dsi: Print dual-DSI-adjusted pclk instead of original mode pclk

[Marijn Suijten]

When dual-DSI (bonded DSI) was added in commit ed9976a09b48
("drm/msm/dsi: adjust dsi timing for dual dsi mode") some DBG() prints
were not updated, leading to print the original mode->clock rather
than the adjusted (typically the mode clock divided by two, though more
recently also adjusted for DSC compression) msm_host->pixel_clk_rate
which is passed to clk_set_rate() just below.  Fix that by printing the
actual pixel_clk_rate that is being set.

Fixes: ed9976a09b48 ("drm/msm/dsi: adjust dsi timing for dual dsi mode")
Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 9d86a6aca6f2..c80be74cf10b 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -356,8 +356,8 @@ int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host)
 {
 	int ret;
 
-	DBG("Set clk rates: pclk=%d, byteclk=%lu",
-		msm_host->mode->clock, msm_host->byte_clk_rate);
+	DBG("Set clk rates: pclk=%lu, byteclk=%lu",
+	    msm_host->pixel_clk_rate, msm_host->byte_clk_rate);
 
 	ret = dev_pm_opp_set_rate(&msm_host->pdev->dev,
 				  msm_host->byte_clk_rate);
@@ -430,9 +430,9 @@ int dsi_link_clk_set_rate_v2(struct msm_dsi_host *msm_host)
 {
 	int ret;
 
-	DBG("Set clk rates: pclk=%d, byteclk=%lu, esc_clk=%lu, dsi_src_clk=%lu",
-		msm_host->mode->clock, msm_host->byte_clk_rate,
-		msm_host->esc_clk_rate, msm_host->src_clk_rate);
+	DBG("Set clk rates: pclk=%lu, byteclk=%lu, esc_clk=%lu, dsi_src_clk=%lu",
+	    msm_host->pixel_clk_rate, msm_host->byte_clk_rate,
+	    msm_host->esc_clk_rate, msm_host->src_clk_rate);
 
 	ret = clk_set_rate(msm_host->byte_clk, msm_host->byte_clk_rate);
 	if (ret) {

-- 
2.44.0