Re: [PATCH 1/2] media: dt-bindings: Add ST VD56G3 camera sensor binding

[Rob Herring]

On Wed, Apr 17, 2024 at 03:34:52PM +0200, Sylvain Petinot wrote:
> Add devicetree bindings Documentation for ST VD56G3 & ST VD66GY camera
> sensors. Update MAINTAINERS file.
> 
> Signed-off-by: Sylvain Petinot <sylvain.petinot@xxxxxxxxxxx>
> ---
>  .../bindings/media/i2c/st,st-vd56g3.yaml      | 143 ++++++++++++++++++
>  MAINTAINERS                                   |   9 ++
>  2 files changed, 152 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/st,st-vd56g3.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-vd56g3.yaml b/Documentation/devicetree/bindings/media/i2c/st,st-vd56g3.yaml
> new file mode 100644
> index 000000000000..6792c02fea5c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/st,st-vd56g3.yaml
> @@ -0,0 +1,143 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (c) 2024 STMicroelectronics SA.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/st,st-vd56g3.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics VD56G3 Global Shutter Image Sensor
> +
> +maintainers:
> +  - Benjamin Mugnier <benjamin.mugnier@xxxxxxxxxxx>
> +  - Sylvain Petinot <sylvain.petinot@xxxxxxxxxxx>
> +
> +description: |-
> +  The STMicroelectronics VD56G3 is a 1.5 M pixel global shutter image sensor
> +  with an active array size of 1124 x 1364 (portrait orientation).
> +  It is programmable through I2C, the address is fixed to 0x10.
> +  The sensor output is available via CSI-2, which is configured as either 1 or
> +  2 data lanes.
> +  The sensor provides 8 GPIOS that can be used for either
> +    - frame synchronization (Master: out-sync or Slave: in-sync)
> +    - external LED signal (synchronized with sensor integration periods)
> +
> +properties:
> +  compatible:
> +    enum:
> +      - st,st-vd56g3
> +      - st,st-vd66gy
> +    description:
> +      Two variants are availables; VD56G3 is a monochrome sensor while VD66GY
> +      is a colour variant.
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  VCORE-supply:

Convention is lowercase.

> +    description: Digital core power supply (1.15V)
> +
> +  VDDIO-supply:
> +    description: Digital IO power supply (1.8V)
> +
> +  VANA-supply:
> +    description: Analog power supply (2.8V)
> +
> +  reset-gpios:
> +    description: Sensor reset active low GPIO (XSHUTDOWN)
> +    maxItems: 1
> +
> +  st,leds:
> +    description:
> +      Sensor's GPIOs used for external LED control.
> +      Signal being the enveloppe of the integration time.
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 1
> +    maxItems: 8
> +    items:
> +      minimum: 0
> +      maximum: 7
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/$defs/port-base
> +
> +    properties:
> +      endpoint:
> +        $ref: /schemas/media/video-interfaces.yaml#
> +        unevaluatedProperties: false
> +
> +        properties:
> +          clock-lanes:
> +            const: 0

If required and only 1 possible value, why does this need to be in DT?

> +
> +          data-lanes:
> +            minItems: 1
> +            maxItems: 2
> +            items:
> +              enum: [1, 2]
> +
> +          link-frequencies:
> +            minItems: 1
> +            maxItems: 1
> +            items:
> +              enum: [402000000, 750000000]
> +
> +          lane-polarities:
> +            minItems: 1
> +            maxItems: 3
> +            items:
> +              enum: [0, 1]

video-interfaces.yaml already defines this constraint, so you just need 
to define how many entries.

> +            description: Any lane can be inverted or not.
> +
> +        required:
> +          - clock-lanes
> +          - data-lanes
> +          - link-frequencies
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - VCORE-supply
> +  - VDDIO-supply
> +  - VANA-supply
> +  - reset-gpios
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        vd56g3: camera-sensor@10 {

Drop unused labels.

> +            compatible = "st,st-vd56g3";
> +            reg = <0x10>;
> +
> +            clocks = <&camera_clk_12M>;
> +
> +            VCORE-supply = <&camera_vcore_v1v15>;
> +            VDDIO-supply = <&camera_vddio_v1v8>;
> +            VANA-supply = <&camera_vana_v2v8>;
> +
> +            reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
> +            st,leds = <6>;
> +
> +            port {
> +                vd56g3_ep: endpoint {
> +                    clock-lanes = <0>;
> +                    data-lanes = <1 2>;
> +                    link-frequencies =
> +                      /bits/ 64 <402000000>;
> +                    remote-endpoint = <&csiphy0_ep>;
> +                };
> +            };
> +        };
> +    };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7c121493f43d..991e65627e18 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -20868,6 +20868,15 @@ S:	Maintained
>  F:	Documentation/hwmon/stpddc60.rst
>  F:	drivers/hwmon/pmbus/stpddc60.c
>  
> +ST VD56G3 DRIVER
> +M:	Benjamin Mugnier <benjamin.mugnier@xxxxxxxxxxx>
> +M:	Sylvain Petinot <sylvain.petinot@xxxxxxxxxxx>
> +L:	linux-media@xxxxxxxxxxxxxxx
> +S:	Maintained
> +T:	git git://linuxtv.org/media_tree.git

This should be covered by the media maintainer entry.

> +F:	Documentation/devicetree/bindings/media/i2c/st,st-vd56g3.yaml
> +F:	drivers/media/i2c/st-vd56g3.c
> +
>  ST VGXY61 DRIVER
>  M:	Benjamin Mugnier <benjamin.mugnier@xxxxxxxxxxx>
>  M:	Sylvain Petinot <sylvain.petinot@xxxxxxxxxxx>
> -- 
> 2.17.1
>