Re: [PATCH 0/3] arm64: mx93: etherrnet: set TX_CLK in RMII mode

[Steffen Trumtrar]

Hi,

On 2024-04-22 at 11:28 +02, Sébastien Szymanski <sebastien.szymanski@xxxxxxxxxxxx> wrote: 

> Hello,  On 4/22/24 10:46, Steffen Trumtrar wrote: 
> > This series adds support for setting the TX_CLK direction in the eQOS ethernet core on the i.MX93 when RMII mode is used.  According to AN14149, when the i.MX93 ethernet controller is used in RMII mode, the TX_CLK *must* be set to output mode. 
>  Must ? I don't think that is true. Downstream NXP kernel has an option to set TX_CLK as an input: 

re-reading that passage again, it only says "other registers that must be configured" and that the ENET_QOS_CLK_TX_CLK_SEL bit "is 0b1" for RMII. So, maybe you are right. 


Thanks,
Steffen

> https://github.com/nxp-imx/linux-imx/blob/lf-6.6.y/Documentation/devicetree/bindings/net/nxp%2Cdwmac-imx.yaml#L69
>
> https://github.com/nxp-imx/linux-imx/commit/fbc17f6f7919d03c275fc48b0400c212475b60ec

--
Pengutronix e.K.                | Dipl.-Inform. Steffen Trumtrar |
Steuerwalder Str. 21            | https://www.pengutronix.de/    |
31137 Hildesheim, Germany       | Phone: +49-5121-206917-0       |
Amtsgericht Hildesheim, HRA 2686| Fax:   +49-5121-206917-5555    |