Re: [PATCH] thermal: adding check if the thermal firmware is running

[Jonathan Bither]

On 5/17/24 10:16, Guilherme Giacomo Simoes wrote:
> In the dmesg is showing the message "failed to read out thermal zone"
> as if the temperature read is failed by don't find the thermal zone.
>
> After researching and debugging, I see that this specific error is
> occurrenced because the thermal try read the temperature when is started,
> but the firmware is not running yet.
>
> For more legibiliti i change the tt.c for return EAGAIN when this was occurrence.
> After this change, in my computer I compile and install kernel in /boot
> and in my dmesg the message "failed to read out thermal zone" is not show
> any more.
>
> I would like to thanks for Rafael Wysocki <refael.j.wysocki@xxxxxxxxx> for
> your suggestions in mu first patch that results in this another patch.
> ---
>   drivers/net/wireless/intel/iwlwifi/mvm/tt.c | 10 ++++++++--
>   1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
> index 8083c4b2ab6b..68ab9966330c 100644
> --- a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
> +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
> @@ -620,8 +620,14 @@ static int iwl_mvm_tzone_get_temp(struct thermal_zone_device *device,
>   
>   	mutex_lock(&mvm->mutex);
>   
> -	if (!iwl_mvm_firmware_running(mvm) ||
> -	    mvm->fwrt.cur_fw_img != IWL_UCODE_REGULAR) {
> +	const int res = iwl_mvm_firmware_running(mvm);
> +
> +	if (!res) {
> +		ret = -EAGAIN;
> +		goto out;
> +	}
> +

You could skip using the res variable and move the mutex lock here and 
simplify the above a bit. Ex:

        int temp;

-       mutex_lock(&mvm->mutex);
+       if (!iwl_mvm_firmware_running(mvm))
+               return -EAGAIN;

-       if (!iwl_mvm_firmware_running(mvm) ||
-           mvm->fwrt.cur_fw_img != IWL_UCODE_REGULAR) {
+       mutex_lock(&mvm->mutex);
+       if (mvm->fwrt.cur_fw_img != IWL_UCODE_REGULAR) {
                ret = -ENODATA;
                goto out;
        }

> +	if (mvm->fwrt.cur_fw_img != IWL_UCODE_REGULAR) {
>   		ret = -ENODATA;
>   		goto out;
>   	}