RE: [RFC] dt-bindings: firmware: arm,scmi: Add properties for i.MX95 Pinctrl OEM extensions

[Peng Fan]

> Subject: Re: [RFC] dt-bindings: firmware: arm,scmi: Add properties for i.MX95
> Pinctrl OEM extensions
> 
> On Thu, May 16, 2024 at 03:30:12PM +0800, Peng Fan (OSS) wrote:
> > From: Peng Fan <peng.fan@xxxxxxx>
> >
> > i.MX95 Pinctrl is managed by System Control Management Interface(SCMI)
> > firmware using OEM extensions. No functions, no groups are provided by
> > the firmware. So add i.MX95 specific properties.
> >
> > To keep aligned with current i.MX pinctrl bindings, still use "fsl,pins"
> > for i.MX95.
> >
> > Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> > ---
> >
> > V1:
> >  There is already a v6 version for i.MX95 pinctrl with binding got
> > reviewed by  Rob,
> > https://lore.kernel.org/all/20240513-pinctrl-scmi-oem-v3-v6-1-904975c9
> > 9cc4@xxxxxxx/  But after NXP internal discussion, to keep "fsl,pins"
> > for i.MX95 would make  it aligned with current i.MX93/8M/7 bindings
> > which people are familiar with,  and easy to understand.
> >
> >  Sorry to bring back so late after your reviewing in previous generic
> > binding  patch. This is not to reject the v6 patch, just wanna to see
> > whether you are  happy with "fsl,pins" for i.MX95. If people are happy
> > to accept, I will post  out driver together with this patch in new
> > patchset to reject v6. If people are  not happy, we could continue with v6.
> >
> >  v6:
> > https://lore.kernel.org/all/20240513-pinctrl-scmi-oem-v3-v6-0-904975c9
> > 9cc4@xxxxxxx/
> >
> >  Thanks,
> >  Peng
> >
> >  .../bindings/firmware/arm,scmi.yaml           |  4 +-
> >  .../firmware/nxp,imx95-scmi-pinctrl.yaml      | 54 +++++++++++++++++++
> >  2 files changed, 57 insertions(+), 1 deletion(-)  create mode 100644
> > Documentation/devicetree/bindings/firmware/nxp,imx95-scmi-pinctrl.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > index 7de2c29606e5..f7a48b1e9f62 100644
> > --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > @@ -251,7 +251,9 @@ properties:
> >      type: object
> >      allOf:
> >        - $ref: '#/$defs/protocol-node'
> > -      - $ref: /schemas/pinctrl/pinctrl.yaml
> > +      - anyOf:
> > +          - $ref: /schemas/pinctrl/pinctrl.yaml
> > +          - $ref: /schemas/firmware/nxp,imx95-scmi-pinctrl.yaml
> >
> >      unevaluatedProperties: false
> >
> > diff --git
> > a/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi-pinctrl.ya
> > ml
> > b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi-pinctrl.ya
> > ml
> > new file mode 100644
> > index 000000000000..3f28c4a171c7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi-pinctr
> > +++ l.yaml
> > @@ -0,0 +1,54 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # Copyright 2024
> > +NXP %YAML 1.2
> > +---
> > +$id:
> > +http://devicetree.org/schemas/firmware/nxp,imx95-scmi-pinctrl.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: i.MX System Control and Management Interface (SCMI) Pinctrl
> > +Protocol
> > +
> > +maintainers:
> > +  - Peng Fan <peng.fan@xxxxxxx>
> > +
> > +allOf:
> > +  - $ref: /schemas/pinctrl/pinctrl.yaml
> > +
> > +patternProperties:
> > +  'grp$':
> > +    type: object
> > +    description:
> > +      Pinctrl node's client devices use subnodes for desired pin configuration.
> > +      Client device subnodes use below standard properties.
> > +
> > +    unevaluatedProperties: false
> > +
> > +    properties:
> > +      fsl,pins:
> > +        description:
> > +          each entry consists of 6 integers and represents the mux and config
> > +          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
> > +          mux_val input_val> are specified using a PIN_FUNC_ID macro, which
> can
> > +          be found in <arch/arm64/boot/dts/freescale/imx95-pinfunc.h>. The
> last
> > +          integer CONFIG is the pad setting value like pull-up on this pin.
> Please
> > +          refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
> > +        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> > +        items:
> > +          items:
> > +            - description: |
> 
> needn't "|"
> 

No. there will be dt binding check warning because of quoted string.

Regards,
Peng.

> Frank
> 
> > +                "mux_reg" indicates the offset of mux register.
> > +            - description: |
> > +                "conf_reg" indicates the offset of pad configuration register.
> > +            - description: |
> > +                "input_reg" indicates the offset of select input register.
> > +            - description: |
> > +                "mux_val" indicates the mux value to be applied.
> > +            - description: |
> > +                "input_val" indicates the select input value to be applied.
> > +            - description: |
> > +                "pad_setting" indicates the pad configuration value to be applied.
> > +
> > +
> > +    required:
> > +      - fsl,pins
> > +
> > +additionalProperties: true
> > --
> > 2.37.1
> >