[PATCH 06/10] arm64: dts: qcom: sc8180x-pmics: Add second PMC8180 GPIO

[Bjorn Andersson]

From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>

The SC8180X comes with two PMC8180 PMICs, with the GPIO block being used
to control VBUS supply of the second USB multiport port.

Rename the GPIO controller in the first PMC8180 to match the schematics
and define this second controller.

Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
index ddc84282f142..95656b5ed481 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
@@ -141,11 +141,11 @@ rtc@6000 {
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
 		};
 
-		pmc8180_gpios: gpio@c000 {
+		pmc8180_1_gpios: gpio@c000 {
 			compatible = "qcom,pmc8180-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pmc8180_gpios 0 0 10>;
+			gpio-ranges = <&pmc8180_1_gpios 0 0 10>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -200,11 +200,21 @@ pmic@6 {
 		#size-cells = <0>;
 	};
 
-	pmic@8 {
+	pmc8180_2: pmic@8 {
 		compatible = "qcom,pm8150", "qcom,spmi-pmic";
 		reg = <0x8 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		pmc8180_2_gpios: gpio@c000 {
+			compatible = "qcom,pmc8180-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmc8180_2_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	pmic@a {

-- 
2.43.0