[PATCH 07/10] arm64: dts: qcom: sc8180x: Align USB nodes with binding

[Bjorn Andersson]

From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>

Add the pwr_event interrupt and rearrange the order of the other
interrupts to match the binding.

Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc8180x.dtsi | 29 ++++++++++++++++++-----------
 1 file changed, 18 insertions(+), 11 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 067712310560..9ef3fa40e1d8 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -2665,14 +2665,16 @@ gem_noc: interconnect@9680000 {
 		usb_prim: usb@a6f8800 {
 			compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -2739,12 +2741,17 @@ usb_sec: usb@a8f8800 {
 				      "xo";
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 			power-domains = <&gcc USB30_SEC_GDSC>;
-			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 40 IRQ_TYPE_LEVEL_HIGH>,
+
+			interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+					      <&pdc 40 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;

-- 
2.43.0