Re: [PATCH 5/5] arm64: dts: mediatek: mt8188: Add support for Mali GPU on Panfrost

[AngeloGioacchino Del Regno]

Il 27/05/24 16:53, Julien Panis ha scritto:
> On 5/27/24 11:39, AngeloGioacchino Del Regno wrote:
> > Add the necessary OPP table for the GPU and also add a GPU node
> > to enable support for the Valhall-JM G57 MC3 found on this SoC,
> > using the Panfrost driver.
> >
> > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
> > ---
>
> [...]
>
> > +        gpu: gpu@13000000 {
> > +            compatible = "mediatek,mt8188-mali", "arm,mali-valhall-jm";
> > +            reg = <0 0x13000000 0 0x4000>;
> > +
> > +            clocks = <&mfgcfg CLK_MFGCFG_BG3D>;
> > +            interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH 0>,
> > +                     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH 0>,
> > +                     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH 0>;
> > +            interrupt-names = "job", "mmu", "gpu";
> > +            operating-points-v2 = <&gpu_opp_table>;
> > +            power-domains = <&spm MT8188_POWER_DOMAIN_MFG2>,
> > +                    <&spm MT8188_POWER_DOMAIN_MFG3>,
> > +                    <&spm MT8188_POWER_DOMAIN_MFG4>;
> > +            power-domain-names = "core0", "core1", "core2";
>
> Hi Angelo,
>
> I think you should add something like that here:
> #cooling-cells = <2>;
> (the warning is raised when I run 'make dtbs_check')
>
> Julien

I can either add it to a v2 of this series, or you can add it in your patch where
you're actually adding the thermal support.

I have no preferences about who adds it, and I agree that cooling-cells should
eventually get there, so I'll leave the choice to you :-)

Cheers,
Angelo