[PATCH v6 5/5] arm64: dts: qcom: sm8650: Add Broadcast_AND register in LLCC block

[Unnathi Chalicheemala]

Chipsets before SM8450 have only one broadcast register (Broadcast_OR)
which is used to broadcast writes and check for status bit 0 only in
all channels.
>From SM8450 onwards, a new Broadcast_AND region was added which checks
for status bit 1. This hasn't been updated and Broadcast_OR region
was wrongly being used to check for status bit 1 all along.
Hence mapping Broadcast_AND region's address space to LLCC in SM8650.

Signed-off-by: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8650.dtsi | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 62a6e77730bc..0d71aa24a7ba 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -4982,12 +4982,14 @@ system-cache-controller@25000000 {
 			      <0 0x25400000 0 0x200000>,
 			      <0 0x25200000 0 0x200000>,
 			      <0 0x25600000 0 0x200000>,
-			      <0 0x25800000 0 0x200000>;
+			      <0 0x25800000 0 0x200000>,
+			      <0 0x25a00000 0 0x200000>;
 			reg-names = "llcc0_base",
 				    "llcc1_base",
 				    "llcc2_base",
 				    "llcc3_base",
-				    "llcc_broadcast_base";
+				    "llcc_broadcast_base",
+				    "llcc_broadcast_and_base";
 
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};
-- 
2.34.1