[PATCH v6 3/5] arm64: dts: qcom: sm8450: Add Broadcast_AND register in LLCC block

From: Unnathi Chalicheemala
Date: Fri May 31 2024 - 12:48:28 EST


Chipsets before SM8450 have only one broadcast register (Broadcast_OR)
which is used to broadcast writes and check for status bit 0 only in
all channels.
>From SM8450 onwards, a new Broadcast_AND region was added which checks
for status bit 1. This hasn't been updated and Broadcast_OR region
was wrongly being used to check for status bit 1 all along.
Hence mapping Broadcast_AND region's address space to LLCC in SM8450.

Signed-off-by: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 616461fcbab9..f947cacc81b3 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -4362,9 +4362,10 @@ system-cache-controller@19200000 {
compatible = "qcom,sm8450-llcc";
reg = <0 0x19200000 0 0x80000>, <0 0x19600000 0 0x80000>,
<0 0x19300000 0 0x80000>, <0 0x19700000 0 0x80000>,
- <0 0x19a00000 0 0x80000>;
+ <0 0x19a00000 0 0x80000>, <0 0x19c00000 0 0x80000>;
reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
- "llcc3_base", "llcc_broadcast_base";
+ "llcc3_base", "llcc_broadcast_base",
+ "llcc_broadcast_and_base";
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
};

--
2.34.1