Re: [PATCH] riscv: dts: starfive: Update flash partition layout

From: Heinrich Schuchardt
Date: Mon Jun 03 2024 - 11:27:40 EST


On 03.06.24 17:07, matthias.bgg@xxxxxxxxxx wrote:
From: Matthias Brugger <matthias.bgg@xxxxxxxxx>

Up to now, the describe flash partition layout has some gaps.
Use the whole flash chip by getting rid of the gaps.

Suggested-by: Heinrich Schuchardt <heinrich.schuchardt@xxxxxxxxxxxxx>
Signed-off-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>

For flashing larger firmware like EDK II it is helpful to maximize the partition sizes. Thanks for sending the patch.

Commit 8384087a ("riscv: dts: starfive: Add QSPI controller node for StarFive JH7110 SoC") https://lore.kernel.org/linux-riscv/20230804020254.291239-4-william.qiu@xxxxxxxxxxxxxxxx/ introduced the current layout.

CCing Starfive's U-Boot reviewers.

Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@xxxxxxxxxxxxx>


---

arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index 8ff6ea64f0489..37b4c294ffcc5 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -321,16 +321,13 @@ partitions {
#size-cells = <1>;
spl@0 {
- reg = <0x0 0x80000>;
+ reg = <0x0 0xf0000>;
};
uboot-env@f0000 {
reg = <0xf0000 0x10000>;
};
uboot@100000 {
- reg = <0x100000 0x400000>;
- };
- reserved-data@600000 {
- reg = <0x600000 0xa00000>;
+ reg = <0x100000 0xf00000>;
};
};
};