Re: [PATCH v3 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
From: David Lechner
Date: Mon Jun 03 2024 - 16:43:40 EST
On 6/2/24 8:22 PM, Kim Seer Paller wrote:
> LTC2664 4 channel, 16 bit Voltage Output SoftSpan DAC
> LTC2672 5 channel, 16 bit Current Output Softspan DAC
>
> Reported-by: kernel test robot <lkp@xxxxxxxxx>
> Closes: https://lore.kernel.org/oe-kbuild-all/202405241141.kYcxrSem-lkp@xxxxxxxxx/
> Co-developed-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
> Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
> Signed-off-by: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
> ---
> MAINTAINERS | 1 +
> drivers/iio/dac/Kconfig | 11 +
> drivers/iio/dac/Makefile | 1 +
> drivers/iio/dac/ltc2664.c | 806 ++++++++++++++++++++++++++++++++++++++
> 4 files changed, 819 insertions(+)
> create mode 100644 drivers/iio/dac/ltc2664.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index ac1e29e26f31..1262e1231923 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13071,6 +13071,7 @@ S: Supported
> W: https://ez.analog.com/linux-software-drivers
> F: Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml
> F: Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml
> +F: drivers/iio/dac/ltc2664.c
>
> LTC2688 IIO DAC DRIVER
> M: Nuno Sá <nuno.sa@xxxxxxxxxx>
> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
> index 3c2bf620f00f..3d065c157605 100644
> --- a/drivers/iio/dac/Kconfig
> +++ b/drivers/iio/dac/Kconfig
> @@ -370,6 +370,17 @@ config LTC2632
> To compile this driver as a module, choose M here: the
> module will be called ltc2632.
>
> +config LTC2664
> + tristate "Analog Devices LTC2664 and LTC2672 DAC SPI driver"
> + depends on SPI
> + select REGMAP
> + help
> + Say yes here to build support for Analog Devices
> + LTC2664 and LTC2672 converters (DAC).
> +
> + To compile this driver as a module, choose M here: the
> + module will be called ltc2664.
> +
> config M62332
> tristate "Mitsubishi M62332 DAC driver"
> depends on I2C
> diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
> index 8432a81a19dc..2cf148f16306 100644
> --- a/drivers/iio/dac/Makefile
> +++ b/drivers/iio/dac/Makefile
> @@ -37,6 +37,7 @@ obj-$(CONFIG_DS4424) += ds4424.o
> obj-$(CONFIG_LPC18XX_DAC) += lpc18xx_dac.o
> obj-$(CONFIG_LTC1660) += ltc1660.o
> obj-$(CONFIG_LTC2632) += ltc2632.o
> +obj-$(CONFIG_LTC2664) += ltc2664.o
> obj-$(CONFIG_LTC2688) += ltc2688.o
> obj-$(CONFIG_M62332) += m62332.o
> obj-$(CONFIG_MAX517) += max517.o
> diff --git a/drivers/iio/dac/ltc2664.c b/drivers/iio/dac/ltc2664.c
> new file mode 100644
> index 000000000000..ef5d7d6fec5a
> --- /dev/null
> +++ b/drivers/iio/dac/ltc2664.c
> @@ -0,0 +1,806 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * LTC2664 4 channel, 16 bit Voltage Output SoftSpan DAC driver
> + * LTC2672 5 channel, 16 bit Current Output Softspan DAC driver
> + *
> + * Copyright 2024 Analog Devices Inc.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/cleanup.h>
> +#include <linux/device.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/iio/iio.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/mutex.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/spi/spi.h>
> +
> +#define LTC2664_CMD_WRITE_N(n) (0x00 + (n))
> +#define LTC2664_CMD_UPDATE_N(n) (0x10 + (n))
> +#define LTC2664_CMD_WRITE_N_UPDATE_ALL 0x20
> +#define LTC2664_CMD_WRITE_N_UPDATE_N(n) (0x30 + (n))
> +#define LTC2664_CMD_POWER_DOWN_N(n) (0x40 + (n))
> +#define LTC2664_CMD_POWER_DOWN_ALL 0x50
> +#define LTC2664_CMD_SPAN_N(n) (0x60 + (n))
> +#define LTC2664_CMD_CONFIG 0x70
> +#define LTC2664_CMD_MUX 0xB0
> +#define LTC2664_CMD_TOGGLE_SEL 0xC0
> +#define LTC2664_CMD_GLOBAL_TOGGLE 0xD0
> +#define LTC2664_CMD_NO_OPERATION 0xF0
> +#define LTC2664_REF_DISABLE 0x0001
> +#define LTC2664_MSPAN_SOFTSPAN 7
> +
> +#define LTC2672_MAX_CHANNEL 5
> +#define LTC2672_MAX_SPAN 7
> +#define LTC2672_SCALE_MULTIPLIER(n) (50 * BIT(n))
> +
> +enum ltc2664_ids {
> + LTC2664,
> + LTC2672,
> +};
> +
> +enum {
> + LTC2664_SPAN_RANGE_0V_5V,
> + LTC2664_SPAN_RANGE_0V_10V,
> + LTC2664_SPAN_RANGE_M5V_5V,
> + LTC2664_SPAN_RANGE_M10V_10V,
> + LTC2664_SPAN_RANGE_M2V5_2V5,
> +};
> +
> +enum {
> + LTC2664_INPUT_A,
> + LTC2664_INPUT_B,
> + LTC2664_INPUT_B_AVAIL,
> + LTC2664_POWERDOWN,
> + LTC2664_POWERDOWN_MODE,
> + LTC2664_TOGGLE_EN,
> + LTC2664_GLOBAL_TOGGLE,
> +};
> +
> +static const u16 ltc2664_mspan_lut[8][2] = {
> + { LTC2664_SPAN_RANGE_M10V_10V, 32768 }, /* MPS2=0, MPS1=0, MSP0=0 (0)*/
> + { LTC2664_SPAN_RANGE_M5V_5V, 32768 }, /* MPS2=0, MPS1=0, MSP0=1 (1)*/
> + { LTC2664_SPAN_RANGE_M2V5_2V5, 32768 }, /* MPS2=0, MPS1=1, MSP0=0 (2)*/
> + { LTC2664_SPAN_RANGE_0V_10V, 0 }, /* MPS2=0, MPS1=1, MSP0=1 (3)*/
> + { LTC2664_SPAN_RANGE_0V_10V, 32768 }, /* MPS2=1, MPS1=0, MSP0=0 (4)*/
> + { LTC2664_SPAN_RANGE_0V_5V, 0 }, /* MPS2=1, MPS1=0, MSP0=1 (5)*/
> + { LTC2664_SPAN_RANGE_0V_5V, 32768 }, /* MPS2=1, MPS1=1, MSP0=0 (6)*/
> + { LTC2664_SPAN_RANGE_0V_5V, 0 } /* MPS2=1, MPS1=1, MSP0=1 (7)*/
> +};
> +
> +struct ltc2664_state;
> +
> +struct ltc2664_chip_info {
> + enum ltc2664_ids id;
> + const char *name;
> + int (*scale_get)(const struct ltc2664_state *st, int c);
> + int (*offset_get)(const struct ltc2664_state *st, int c);
> + int measurement_type;
> + unsigned int num_channels;
> + const struct iio_chan_spec *iio_chan;
> + const int (*span_helper)[2];
> + unsigned int num_span;
> + unsigned int internal_vref;
> + bool manual_span_support;
> + bool rfsadj_support;
> +};
> +
> +struct ltc2664_chan {
> + bool toggle_chan;
> + bool powerdown;
> + u8 span;
> + u16 raw[2]; /* A/B */
> +};
I would find it helpful to have more comments explainging what the various
fields are for. For example, raw to be used to supply data to a SPI xfer
but actually it is just a shadow copy of the current state of the chip
registers.
> +
> +struct ltc2664_state {
> + struct spi_device *spi;
> + struct regmap *regmap;
> + struct ltc2664_chan channels[LTC2672_MAX_CHANNEL];
> + /* lock to protect against multiple access to the device and shared data */
> + struct mutex lock;
> + const struct ltc2664_chip_info *chip_info;
> + struct iio_chan_spec *iio_channels;
> + int vref;
vref_mv
Always nice to have the units since regulators use µV and IIO uses mV.
Otherwise we have to guess.
> + u32 toggle_sel;
> + u32 global_toggle;
Should this be bool?
> + u32 rfsadj;
rfsadj_ohms
> +};
> +
> +static const int ltc2664_span_helper[][2] = {
> + { 0, 5000 },
> + { 0, 10000 },
> + { -5000, 5000 },
> + { -10000, 10000 },
> + { -2500, 2500 },
> +};
> +
> +static const int ltc2672_span_helper[][2] = {
> + { 0, 3125 },
> + { 0, 6250 },
> + { 0, 12500 },
> + { 0, 25000 },
> + { 0, 50000 },
> + { 0, 100000 },
> + { 0, 200000 },
> + { 0, 300000 },
> +};
> +
> +static int ltc2664_scale_get(const struct ltc2664_state *st, int c)
> +{
> + const struct ltc2664_chan *chan = &st->channels[c];
> + const int (*span_helper)[2] = st->chip_info->span_helper;
> + int span, fs;
> +
> + span = chan->span;
> + if (span < 0)
> + return span;
> +
> + fs = span_helper[span][1] - span_helper[span][0];
> +
> + return (fs / 2500) * st->vref;
Should we multiply first and then divide? 3125 isn't divisible by 2500
so there may be unwanted rounding otherwise.
> +}
> +
> +static int ltc2672_scale_get(const struct ltc2664_state *st, int c)
> +{
> + const struct ltc2664_chan *chan = &st->channels[c];
> + int span, fs;
> +
> + span = chan->span;
> + if (span < 0)
> + return span;
> +
> + fs = 1000 * st->vref / st->rfsadj;
> +
> + if (span == LTC2672_MAX_SPAN)
> + return 4800 * fs;
> +
> + return LTC2672_SCALE_MULTIPLIER(span) * fs;
Are we losing accuracy by multiplying after dividing here as well?
> +}
> +
> +static int ltc2664_offset_get(const struct ltc2664_state *st, int c)
> +{
> + const struct ltc2664_chan *chan = &st->channels[c];
> + int span;
> +
> + span = chan->span;
> + if (span < 0)
> + return span;
> +
> + if (st->chip_info->span_helper[span][0] < 0)
> + return -32768;
> +
> + return 0;
> +}
> +
> +static int ltc2672_offset_get(const struct ltc2664_state *st, int c)
> +{
> + const struct ltc2664_chan *chan = &st->channels[c];
> + int span;
> +
> + span = chan->span;
> + if (span < 0)
> + return span;
> +
> + if (st->chip_info->span_helper[span][1] < 0)
Should this be span_helper[span][0]? [span][1] is always > 0.
And for that matter, [span][0] is always 0 for ltc2672, so
maybe we don't need this check at all?
> + return -32768;
> +
> + return st->chip_info->span_helper[span][1] / 250;
Why is this one not return 0 like the other chip?
Figure 24 and 25 in the datasheet don't show an offset in
the tranfer function.
> +}
> +
> +static int ltc2664_dac_code_write(struct ltc2664_state *st, u32 chan, u32 input,
> + u16 code)
> +{
> + struct ltc2664_chan *c = &st->channels[chan];
> + int ret, reg;
> +
> + guard(mutex)(&st->lock);
> + /* select the correct input register to write to */
> + if (c->toggle_chan) {
> + ret = regmap_write(st->regmap, LTC2664_CMD_TOGGLE_SEL,
> + input << chan);
> + if (ret)
> + return ret;
> + }
> + /*
> + * If in toggle mode the dac should be updated by an
> + * external signal (or sw toggle) and not here.
> + */
> + if (st->toggle_sel & BIT(chan))
> + reg = LTC2664_CMD_WRITE_N(chan);
> + else
> + reg = LTC2664_CMD_WRITE_N_UPDATE_N(chan);
> +
> + ret = regmap_write(st->regmap, reg, code);
> + if (ret)
> + return ret;
> +
> + c->raw[input] = code;
> +
> + if (c->toggle_chan) {
> + ret = regmap_write(st->regmap, LTC2664_CMD_TOGGLE_SEL,
> + st->toggle_sel);
> + if (ret)
> + return ret;
> + }
> +
> + return ret;
> +}
> +
> +static int ltc2664_dac_code_read(struct ltc2664_state *st, u32 chan, u32 input,
> + u32 *code)
> +{
> + guard(mutex)(&st->lock);
> + *code = st->channels[chan].raw[input];
> +
> + return 0;
> +}
> +
> +static const int ltc2664_raw_range[] = {0, 1, U16_MAX};
> +
> +static int ltc2664_read_avail(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + const int **vals, int *type, int *length,
> + long info)
> +{
> + switch (info) {
> + case IIO_CHAN_INFO_RAW:
> + *vals = ltc2664_raw_range;
> + *type = IIO_VAL_INT;
> +
> + return IIO_AVAIL_RANGE;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int ltc2664_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int *val,
> + int *val2, long info)
> +{
> + struct ltc2664_state *st = iio_priv(indio_dev);
> + int ret;
> +
> + switch (info) {
> + case IIO_CHAN_INFO_RAW:
> + ret = ltc2664_dac_code_read(st, chan->channel,
> + LTC2664_INPUT_A, val);
> + if (ret)
> + return ret;
> +
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_OFFSET:
> + *val = st->chip_info->offset_get(st, chan->channel);
> +
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SCALE:
> + *val = st->chip_info->scale_get(st, chan->channel);
> +
> + *val2 = 16;
> + return IIO_VAL_FRACTIONAL_LOG2;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int ltc2664_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int val,
> + int val2, long info)
> +{
> + struct ltc2664_state *st = iio_priv(indio_dev);
> +
> + switch (info) {
> + case IIO_CHAN_INFO_RAW:
> + if (val > U16_MAX || val < 0)
> + return -EINVAL;
> +
> + return ltc2664_dac_code_write(st, chan->channel,
> + LTC2664_INPUT_A, val);
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static ssize_t ltc2664_reg_bool_get(struct iio_dev *indio_dev,
> + uintptr_t private,
> + const struct iio_chan_spec *chan,
> + char *buf)
> +{
> + struct ltc2664_state *st = iio_priv(indio_dev);
> + u32 val;
> +
> + guard(mutex)(&st->lock);
> + switch (private) {
> + case LTC2664_POWERDOWN:
> + val = st->channels[chan->channel].powerdown;
> +
> + return sysfs_emit(buf, "%u\n", val);
> + case LTC2664_POWERDOWN_MODE:
> + return sysfs_emit(buf, "42kohm_to_gnd\n");> + case LTC2664_TOGGLE_EN:
> + val = !!(st->toggle_sel & BIT(chan->channel));
> +
> + return sysfs_emit(buf, "%u\n", val);
> + case LTC2664_GLOBAL_TOGGLE:
> + val = st->global_toggle;
> +
> + return sysfs_emit(buf, "%u\n", val);
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static ssize_t ltc2664_reg_bool_set(struct iio_dev *indio_dev,
> + uintptr_t private,
> + const struct iio_chan_spec *chan,
> + const char *buf, size_t len)
> +{
> + struct ltc2664_state *st = iio_priv(indio_dev);
> + int ret;
> + bool en;
> +
> + ret = kstrtobool(buf, &en);
> + if (ret)
> + return ret;
> +
> + guard(mutex)(&st->lock);
> + switch (private) {
> + case LTC2664_POWERDOWN:
> + ret = regmap_write(st->regmap,
> + en ? LTC2664_CMD_POWER_DOWN_N(chan->channel) :
> + LTC2664_CMD_UPDATE_N(chan->channel), en);
> + if (ret)
> + return ret;
> +
> + st->channels[chan->channel].powerdown = en;
> +
> + return len;
> + case LTC2664_TOGGLE_EN:
> + if (en)
> + st->toggle_sel |= BIT(chan->channel);
> + else
> + st->toggle_sel &= ~BIT(chan->channel);
> +
> + ret = regmap_write(st->regmap, LTC2664_CMD_TOGGLE_SEL,
> + st->toggle_sel);
> + if (ret)
> + return ret;
> +
> + return len;
> + case LTC2664_GLOBAL_TOGGLE:
> + ret = regmap_write(st->regmap, LTC2664_CMD_GLOBAL_TOGGLE, en);
> + if (ret)
> + return ret;
> +
> + st->global_toggle = en;
> +
> + return len;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static ssize_t ltc2664_dac_input_read(struct iio_dev *indio_dev,
> + uintptr_t private,
> + const struct iio_chan_spec *chan,
> + char *buf)
> +{
> + struct ltc2664_state *st = iio_priv(indio_dev);
> + int ret;
> + u32 val;
> +
> + if (private == LTC2664_INPUT_B_AVAIL)
> + return sysfs_emit(buf, "[%u %u %u]\n", ltc2664_raw_range[0],
> + ltc2664_raw_range[1],
> + ltc2664_raw_range[2] / 4);
> +
> + ret = ltc2664_dac_code_read(st, chan->channel, private, &val);
> + if (ret)
> + return ret;
> +
> + return sysfs_emit(buf, "%u\n", val);
> +}
> +
> +static ssize_t ltc2664_dac_input_write(struct iio_dev *indio_dev,
> + uintptr_t private,
> + const struct iio_chan_spec *chan,
> + const char *buf, size_t len)
> +{
> + struct ltc2664_state *st = iio_priv(indio_dev);
> + int ret;
> + u16 val;
> +
> + if (private == LTC2664_INPUT_B_AVAIL)
> + return -EINVAL;
> +
> + ret = kstrtou16(buf, 10, &val);
> + if (ret)
> + return ret;
> +
> + ret = ltc2664_dac_code_write(st, chan->channel, private, val);
> + if (ret)
> + return ret;
> +
> + return len;
> +}
> +
> +static int ltc2664_reg_access(struct iio_dev *indio_dev,
> + unsigned int reg,
> + unsigned int writeval,
> + unsigned int *readval)
> +{
> + struct ltc2664_state *st = iio_priv(indio_dev);
> +
> + if (readval)
> + return -EOPNOTSUPP;
> +
> + return regmap_write(st->regmap, reg, writeval);
> +}
> +
> +#define LTC2664_CHAN_EXT_INFO(_name, _what, _shared, _read, _write) { \
> + .name = _name, \
> + .read = (_read), \
> + .write = (_write), \
> + .private = (_what), \
> + .shared = (_shared), \
> +}
> +
> +/*
> + * For toggle mode we only expose the symbol attr (sw_toggle) in case a TGPx is
> + * not provided in dts.
> + */
> +static const struct iio_chan_spec_ext_info ltc2664_toggle_sym_ext_info[] = {
> + LTC2664_CHAN_EXT_INFO("raw0", LTC2664_INPUT_A, IIO_SEPARATE,
> + ltc2664_dac_input_read, ltc2664_dac_input_write),
> + LTC2664_CHAN_EXT_INFO("raw1", LTC2664_INPUT_B, IIO_SEPARATE,
> + ltc2664_dac_input_read, ltc2664_dac_input_write),
> + LTC2664_CHAN_EXT_INFO("powerdown", LTC2664_POWERDOWN, IIO_SEPARATE,
> + ltc2664_reg_bool_get, ltc2664_reg_bool_set),
> + LTC2664_CHAN_EXT_INFO("powerdown_mode", LTC2664_POWERDOWN_MODE,
> + IIO_SEPARATE, ltc2664_reg_bool_get, NULL),
> + LTC2664_CHAN_EXT_INFO("symbol", LTC2664_GLOBAL_TOGGLE, IIO_SEPARATE,
> + ltc2664_reg_bool_get, ltc2664_reg_bool_set),
> + LTC2664_CHAN_EXT_INFO("toggle_en", LTC2664_TOGGLE_EN,
> + IIO_SEPARATE, ltc2664_reg_bool_get,
> + ltc2664_reg_bool_set),
> + { }
> +};
> +
> +static const struct iio_chan_spec_ext_info ltc2664_ext_info[] = {
> + LTC2664_CHAN_EXT_INFO("powerdown", LTC2664_POWERDOWN, IIO_SEPARATE,
> + ltc2664_reg_bool_get, ltc2664_reg_bool_set),
> + LTC2664_CHAN_EXT_INFO("powerdown_mode", LTC2664_POWERDOWN_MODE,
> + IIO_SEPARATE, ltc2664_reg_bool_get, NULL),
> + { }
> +};
> +
> +#define LTC2664_CHANNEL(_chan) { \
> + .indexed = 1, \
> + .output = 1, \
> + .channel = (_chan), \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_SCALE) | \
> + BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_RAW), \
> + .info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW), \
> + .ext_info = ltc2664_ext_info, \
> +}
> +
> +static const struct iio_chan_spec ltc2664_channels[] = {
> + LTC2664_CHANNEL(0),
> + LTC2664_CHANNEL(1),
> + LTC2664_CHANNEL(2),
> + LTC2664_CHANNEL(3),
> +};
> +
> +static const struct iio_chan_spec ltc2672_channels[] = {
> + LTC2664_CHANNEL(0),
> + LTC2664_CHANNEL(1),
> + LTC2664_CHANNEL(2),
> + LTC2664_CHANNEL(3),
> + LTC2664_CHANNEL(4),
> +};
Do we really need these since they are only used as a template anyway?
We could just have a single template for one channel and copy it as
manay times as needed.
> +
> +static const struct ltc2664_chip_info ltc2664_chip = {
> + .id = LTC2664,
> + .name = "ltc2664",
> + .scale_get = ltc2664_scale_get,
> + .offset_get = ltc2664_offset_get,
> + .measurement_type = IIO_VOLTAGE,
> + .num_channels = ARRAY_SIZE(ltc2664_channels),
> + .iio_chan = ltc2664_channels,
> + .span_helper = ltc2664_span_helper,
> + .num_span = ARRAY_SIZE(ltc2664_span_helper),
> + .internal_vref = 2500,
> + .manual_span_support = true,
> + .rfsadj_support = false,
> +};
> +
> +static const struct ltc2664_chip_info ltc2672_chip = {
> + .id = LTC2672,
> + .name = "ltc2672",
> + .scale_get = ltc2672_scale_get,
> + .offset_get = ltc2672_offset_get,
> + .measurement_type = IIO_CURRENT,
> + .num_channels = ARRAY_SIZE(ltc2672_channels),
> + .iio_chan = ltc2672_channels,
> + .span_helper = ltc2672_span_helper,
> + .num_span = ARRAY_SIZE(ltc2672_span_helper),
> + .internal_vref = 1250,
> + .manual_span_support = false,
> + .rfsadj_support = true,
> +};
> +
> +static int ltc2664_set_span(const struct ltc2664_state *st, int min, int max,
> + int chan)
> +{
> + const struct ltc2664_chip_info *chip_info = st->chip_info;
> + const int (*span_helper)[2] = chip_info->span_helper;
> + int span, ret;
> +
> + st->iio_channels[chan].type = chip_info->measurement_type;
> +
> + for (span = 0; span < chip_info->num_span; span++) {
> + if (min == span_helper[span][0] && max == span_helper[span][1])
> + break;
> + }
> +
> + if (span == chip_info->num_span)
> + return -EINVAL;
> +
> + ret = regmap_write(st->regmap, LTC2664_CMD_SPAN_N(chan),
> + (chip_info->id == LTC2672) ? span + 1 : span);
> + if (ret)
> + return ret;
> +
> + return span;
> +}
> +
> +static int ltc2664_channel_config(struct ltc2664_state *st)
> +{
> + const struct ltc2664_chip_info *chip_info = st->chip_info;
> + struct device *dev = &st->spi->dev;
> + u32 reg, tmp[2], mspan;
> + int ret, span = 0;
> +
> + mspan = LTC2664_MSPAN_SOFTSPAN;
> + ret = device_property_read_u32(dev, "adi,manual-span-operation-config",
> + &mspan);
> + if (!ret) {
> + if (!chip_info->manual_span_support)
> + return dev_err_probe(dev, -EINVAL,
> + "adi,manual-span-operation-config not supported\n");
> +
> + if (mspan > ARRAY_SIZE(ltc2664_mspan_lut))
> + return dev_err_probe(dev, -EINVAL,
> + "adi,manual-span-operation-config not in range\n");
> + }
> +
> + st->rfsadj = 20000;
> + ret = device_property_read_u32(dev, "adi,rfsadj-ohms", &st->rfsadj);
> + if (!ret) {
> + if (!chip_info->rfsadj_support)
> + return dev_err_probe(dev, -EINVAL,
> + "adi,rfsadj-ohms not supported\n");
> +
> + if (st->rfsadj < 19000 || st->rfsadj > 41000)
> + return dev_err_probe(dev, -EINVAL,
> + "adi,rfsadj-ohms not in range\n");
> + }
> +
> + device_for_each_child_node_scoped(dev, child) {
> + struct ltc2664_chan *chan;
> +
> + ret = fwnode_property_read_u32(child, "reg", ®);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Failed to get reg property\n");
> +
> + if (reg >= chip_info->num_channels)
> + return dev_err_probe(dev, -EINVAL,
> + "reg bigger than: %d\n",
> + chip_info->num_channels);
> +
> + chan = &st->channels[reg];
> +
> + if (fwnode_property_read_bool(child, "adi,toggle-mode")) {
> + chan->toggle_chan = true;
> + /* assume sw toggle ABI */
> + st->iio_channels[reg].ext_info = ltc2664_toggle_sym_ext_info;
> +
> + /*
> + * Clear IIO_CHAN_INFO_RAW bit as toggle channels expose
> + * out_voltage/current_raw{0|1} files.
> + */
> + __clear_bit(IIO_CHAN_INFO_RAW,
> + &st->iio_channels[reg].info_mask_separate);
> + }
> +
> + chan->raw[0] = ltc2664_mspan_lut[mspan][1];
> + chan->raw[1] = ltc2664_mspan_lut[mspan][1];
> +
> + chan->span = ltc2664_mspan_lut[mspan][0];
> +
> + ret = fwnode_property_read_u32_array(child, "adi,output-range-microvolt",
> + tmp, ARRAY_SIZE(tmp));
> + if (!ret && mspan == LTC2664_MSPAN_SOFTSPAN) {
> + chan->span = ltc2664_set_span(st, tmp[0] / 1000,
> + tmp[1] / 1000, reg);
> + if (span < 0)
> + return dev_err_probe(dev, span,
> + "Failed to set span\n");
> +
> + }
> +
> + ret = fwnode_property_read_u32(child,
> + "adi,output-range-microamp",
> + &tmp[0]);
> + if (!ret) {
> + chan->span = ltc2664_set_span(st, 0, tmp[0] / 1000, reg);
> + if (span < 0)
> + return dev_err_probe(dev, span,
> + "Failed to set span\n");
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int ltc2664_setup(struct ltc2664_state *st, struct regulator *vref)
> +{
> + const struct ltc2664_chip_info *chip_info = st->chip_info;
> + struct gpio_desc *gpio;
> + int ret;
> +
> + /* If we have a clr/reset pin, use that to reset the chip. */
> + gpio = devm_gpiod_get_optional(&st->spi->dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(gpio))
> + return dev_err_probe(&st->spi->dev, PTR_ERR(gpio),
> + "Failed to get reset gpio");
> + if (gpio) {
> + usleep_range(1000, 1200);
fsleep(1000)
> + gpiod_set_value_cansleep(gpio, 0);
> + }
> +
> + /*
> + * Duplicate the default channel configuration as it can change during
> + * @ltc2664_channel_config()
> + */
> + st->iio_channels = devm_kmemdup(&st->spi->dev, chip_info->iio_chan,
> + (chip_info->num_channels + 1) *
> + sizeof(*chip_info->iio_chan),
> + GFP_KERNEL);
> +
> + ret = ltc2664_channel_config(st);
> + if (ret)
> + return ret;
> +
> + if (!vref)
> + return 0;
> +
> + return regmap_set_bits(st->regmap, LTC2664_CMD_CONFIG, LTC2664_REF_DISABLE);
> +}
> +
> +static void ltc2664_disable_regulator(void *regulator)
> +{
> + regulator_disable(regulator);
> +}
> +
> +static const struct regmap_config ltc2664_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 16,
> + .max_register = LTC2664_CMD_NO_OPERATION,
> +};
> +
> +static const struct iio_info ltc2664_info = {
> + .write_raw = ltc2664_write_raw,
> + .read_raw = ltc2664_read_raw,
> + .read_avail = ltc2664_read_avail,
> + .debugfs_reg_access = ltc2664_reg_access,
> +};
> +
> +static int ltc2664_probe(struct spi_device *spi)
> +{
> + static const char * const regulators[] = { "vcc", "iovcc", "v-neg" };
> + const struct ltc2664_chip_info *chip_info;
> + struct device *dev = &spi->dev;
> + struct regulator *vref_reg;
> + struct iio_dev *indio_dev;
> + struct ltc2664_state *st;
> + int ret;
> +
> + indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + st = iio_priv(indio_dev);
> + st->spi = spi;
> +
> + chip_info = spi_get_device_match_data(spi);
> + if (!chip_info)
> + return -ENOMEM;
ENOMEM? Usually, this is EINVAL and sometimes ENODEV. Not sure what
should be preferred.
> +
> + st->chip_info = chip_info;
> +
> + mutex_init(&st->lock);
> +
> + st->regmap = devm_regmap_init_spi(spi, <c2664_regmap_config);
> + if (IS_ERR(st->regmap))
> + return dev_err_probe(dev, PTR_ERR(st->regmap),
> + "Failed to init regmap");
> +
> + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(regulators),
> + regulators);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to enable regulators\n");
> +
> + vref_reg = devm_regulator_get_optional(dev, "ref");
> + if (IS_ERR(vref_reg)) {
> + if (PTR_ERR(vref_reg) != -ENODEV)
> + return dev_err_probe(dev, PTR_ERR(vref_reg),
> + "Failed to get ref regulator");
> +
> + vref_reg = NULL;
> +
> + st->vref = chip_info->internal_vref;
> + } else {
> + ret = regulator_enable(vref_reg);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Failed to enable ref regulators\n");
> +
> + ret = devm_add_action_or_reset(dev, ltc2664_disable_regulator,
> + vref_reg);
> + if (ret)
> + return ret;
> +
> + ret = regulator_get_voltage(vref_reg);
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "Failed to get ref\n");
> +
> + st->vref = ret / 1000;
> + }
There is a new API to allow simplifying this:
ret = devm_regulator_get_enable_read_voltage(dev, "ref");
if (ret == -ENODEV)
st->vref_mv = chip_info->internal_vref_mv;
else if (ret < 0)
return dev_err_probe(dev, ret, "Failed to get vref voltage\n");
else
st->vref_mv = ret / 1000;
And ltc2664_disable_regulator and vref_reg are removed too.
> +
> + ret = ltc2664_setup(st, vref_reg);
> + if (ret)
> + return ret;
> +
> + indio_dev->name = chip_info->name;
> + indio_dev->info = <c2664_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->channels = st->iio_channels;
> + indio_dev->num_channels = chip_info->num_channels;
> +
> + return devm_iio_device_register(dev, indio_dev);
> +}
> +
> +static const struct spi_device_id ltc2664_id[] = {
> + { "ltc2664", (kernel_ulong_t)<c2664_chip },
> + { "ltc2672", (kernel_ulong_t)<c2672_chip },
> + { }
> +};
> +MODULE_DEVICE_TABLE(spi, ltc2664_id);
> +
> +static const struct of_device_id ltc2664_of_id[] = {
> + { .compatible = "adi,ltc2664", .data = <c2664_chip },
> + { .compatible = "adi,ltc2672", .data = <c2672_chip },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, ltc2664_of_id);
> +
> +static struct spi_driver ltc2664_driver = {
> + .driver = {
> + .name = "ltc2664",
> + .of_match_table = ltc2664_of_id,
> + },
> + .probe = ltc2664_probe,
> + .id_table = ltc2664_id,
> +};
> +module_spi_driver(ltc2664_driver);
> +
> +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@xxxxxxxxxx>");
> +MODULE_AUTHOR("Kim Seer Paller <kimseer.paller@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("Analog Devices LTC2664 and LTC2672 DAC");
> +MODULE_LICENSE("GPL");