Re: [PATCH] ASoC: fsl: Add i2s and pcm drivers for LPC32xx CPUs

[Rob Herring (Arm)]

On Mon, 10 Jun 2024 12:24:07 +0200, Piotr Wojtaszczyk wrote:
> This driver was ported from an old version in linux 2.6.27 and adjusted
> for the new ASoC framework and DMA API.
> 
> Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@xxxxxxxxxxx>
> ---
>  .../bindings/sound/nxp,lpc3220-i2s.yaml       |  50 +++
>  arch/arm/boot/dts/lpc32xx.dtsi                |   4 +
>  arch/arm/mach-lpc32xx/phy3250.c               |  60 +++
>  sound/soc/fsl/Kconfig                         |   7 +
>  sound/soc/fsl/Makefile                        |   2 +
>  sound/soc/fsl/lpc3xxx-i2s.c                   | 411 ++++++++++++++++++
>  sound/soc/fsl/lpc3xxx-i2s.h                   |  94 ++++
>  sound/soc/fsl/lpc3xxx-pcm.c                   |  75 ++++
>  8 files changed, 703 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/nxp,lpc3220-i2s.yaml
>  create mode 100644 sound/soc/fsl/lpc3xxx-i2s.c
>  create mode 100644 sound/soc/fsl/lpc3xxx-i2s.h
>  create mode 100644 sound/soc/fsl/lpc3xxx-pcm.c
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/nxp,lpc3220-i2s.yaml: 'maintainers' is a required property
	hint: Metaschema for devicetree binding documentation
	from schema $id: http://devicetree.org/meta-schemas/base.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240610102415.79740-1-piotr.wojtaszczyk@xxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.