Re: [PATCH 1/4] remoteproc: k3-r5: Fix IPC-only mode detection

From: Mathieu Poirier
Date: Fri Jun 28 2024 - 15:53:44 EST


Good day,

On Fri, Jun 21, 2024 at 05:00:55PM +0200, Richard Genoud wrote:
> ret variable was used to test reset status, get from
> reset_control_status() call. But this variable was overwritten by
> ti_sci_proc_get_status() a few lines bellow.
> And as ti_sci_proc_get_status() returns 0 or a negative value (in this
> latter case, followed by a return), the expression !ret was always true,
>
> Clearly, this was not what was intended:
> In the comment above it's said that "requires both local and module
> resets to be deasserted"; if reset_control_status() returns 0 it means
> that the reset line is deasserted.
> So, it's pretty clear that the return value of reset_control_status()
> was intended to be used instead of ti_sci_proc_get_status() return
> value.
>
> This could lead in an incorrect IPC-only mode detection if reset line is
> asserted (so reset_control_status() return > 0) and c_state != 0 and
> halted == 0.
> In this case, the old code would have detected an IPC-only mode instead
> of a mismatched mode.
>

Your assessment seems to be correct. That said I'd like to have an RB or a TB
from someone in the TI delegation - guys please have a look.

Thanks,
Mathieu

> Fixes: 1168af40b1ad ("remoteproc: k3-r5: Add support for IPC-only mode for all R5Fs")
> Signed-off-by: Richard Genoud <richard.genoud@xxxxxxxxxxx>
> ---
> drivers/remoteproc/ti_k3_r5_remoteproc.c | 13 +++++++------
> 1 file changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/remoteproc/ti_k3_r5_remoteproc.c b/drivers/remoteproc/ti_k3_r5_remoteproc.c
> index 50e486bcfa10..39a47540c590 100644
> --- a/drivers/remoteproc/ti_k3_r5_remoteproc.c
> +++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c
> @@ -1144,6 +1144,7 @@ static int k3_r5_rproc_configure_mode(struct k3_r5_rproc *kproc)
> u32 atcm_enable, btcm_enable, loczrama;
> struct k3_r5_core *core0;
> enum cluster_mode mode = cluster->mode;
> + int reset_ctrl_status;
> int ret;
>
> core0 = list_first_entry(&cluster->cores, struct k3_r5_core, elem);
> @@ -1160,11 +1161,11 @@ static int k3_r5_rproc_configure_mode(struct k3_r5_rproc *kproc)
> r_state, c_state);
> }
>
> - ret = reset_control_status(core->reset);
> - if (ret < 0) {
> + reset_ctrl_status = reset_control_status(core->reset);
> + if (reset_ctrl_status < 0) {
> dev_err(cdev, "failed to get initial local reset status, ret = %d\n",
> - ret);
> - return ret;
> + reset_ctrl_status);
> + return reset_ctrl_status;
> }
>
> /*
> @@ -1199,7 +1200,7 @@ static int k3_r5_rproc_configure_mode(struct k3_r5_rproc *kproc)
> * irrelevant if module reset is asserted (POR value has local reset
> * deasserted), and is deemed as remoteproc mode
> */
> - if (c_state && !ret && !halted) {
> + if (c_state && !reset_ctrl_status && !halted) {
> dev_info(cdev, "configured R5F for IPC-only mode\n");
> kproc->rproc->state = RPROC_DETACHED;
> ret = 1;
> @@ -1217,7 +1218,7 @@ static int k3_r5_rproc_configure_mode(struct k3_r5_rproc *kproc)
> ret = 0;
> } else {
> dev_err(cdev, "mismatched mode: local_reset = %s, module_reset = %s, core_state = %s\n",
> - !ret ? "deasserted" : "asserted",
> + !reset_ctrl_status ? "deasserted" : "asserted",
> c_state ? "deasserted" : "asserted",
> halted ? "halted" : "unhalted");
> ret = -EINVAL;