[PATCH 4/5] ARM: dts: qcom: Add vadc support for pm8775 pmic on SA8775P

[Satya Priya Kakitapalli]

Add support for reading the adc channels of pm8775 on SA8775P platforms.

Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 90 +++++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
index 1369c3d43f86..bd4f5f51e094 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
@@ -1,8 +1,10 @@
 // SPDX-License-Identifier: BSD-3-Clause
 /*
  * Copyright (c) 2023, Linaro Limited
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
+#include <dt-bindings/iio/adc/qcom,spmi-adc5-gen3-pm8775.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/spmi/spmi.h>
 
@@ -105,6 +107,28 @@ pmm8654au_0: pmic@0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmm8654au_0_adc: vadc@8000 {
+			compatible = "qcom,spmi-adc5-gen3";
+			reg = <0x8000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts-extended = <&spmi_bus 0x0 0x80 0x1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "adc-sdam0";
+			#io-channel-cells = <1>;
+
+			pmm8654au_0_die_temp {
+				reg = <PM8775_ADC5_GEN3_DIE_TEMP(0)>;
+				label = "pmm8654au_0_die_temp";
+				qcom,pre-scaling = <1 1>;
+			};
+
+			pmm8654au_0_vph_pwr {
+				reg = <PM8775_ADC5_GEN3_VPH_PWR(0)>;
+				label = "pmm8654au_0_vph_pwr";
+				qcom,pre-scaling = <1 3>;
+			};
+		};
+
 		pmm8654au_0_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
@@ -162,6 +186,28 @@ pmm8654au_1: pmic@2 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmm8654au_1_adc: vadc@8000 {
+			compatible = "qcom,spmi-adc5-gen3";
+			reg = <0x8000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts-extended = <&spmi_bus 0x2 0x80 0x1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "adc-sdam0";
+			#io-channel-cells = <1>;
+
+			pmm8654au_1_die_temp {
+				reg = <PM8775_ADC5_GEN3_DIE_TEMP(2)>;
+				label = "pmm8654au_1_die_temp";
+				qcom,pre-scaling = <1 1>;
+			};
+
+			pmm8654au_1_vph_pwr {
+				reg = <PM8775_ADC5_GEN3_VPH_PWR(2)>;
+				label = "pmm8654au_1_vph_pwr";
+				qcom,pre-scaling = <1 3>;
+			};
+		};
+
 		pmm8654au_1_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
@@ -186,6 +232,28 @@ pmm8654au_2: pmic@4 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmm8654au_2_adc: vadc@8000 {
+			compatible = "qcom,spmi-adc5-gen3";
+			reg = <0x8000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts-extended = <&spmi_bus 0x4 0x80 0x1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "adc-sdam0";
+			#io-channel-cells = <1>;
+
+			pmm8654au_2_die_temp {
+				reg = <PM8775_ADC5_GEN3_DIE_TEMP(4)>;
+				label = "pmm8654au_2_die_temp";
+				qcom,pre-scaling = <1 1>;
+			};
+
+			pmm8654au_2_vph_pwr {
+				reg = <PM8775_ADC5_GEN3_VPH_PWR(4)>;
+				label = "pmm8654au_2_vph_pwr";
+				qcom,pre-scaling = <1 3>;
+			};
+		};
+
 		pmm8654au_2_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
@@ -210,6 +278,28 @@ pmm8654au_3: pmic@6 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmm8654au_3_adc: vadc@8000 {
+			compatible = "qcom,spmi-adc5-gen3";
+			reg = <0x8000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts-extended = <&spmi_bus 0x6 0x80 0x1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "adc-sdam0";
+			#io-channel-cells = <1>;
+
+			pmm8654au_3_die_temp {
+				reg = <PM8775_ADC5_GEN3_DIE_TEMP(6)>;
+				label = "pmm8654au_3_die_temp";
+				qcom,pre-scaling = <1 1>;
+			};
+
+			pmm8654au_3_vph_pwr {
+				reg = <PM8775_ADC5_GEN3_VPH_PWR(6)>;
+				label = "pmm8654au_3_vph_pwr";
+				qcom,pre-scaling = <1 3>;
+			};
+		};
+
 		pmm8654au_3_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;

-- 
2.25.1