[PATCH 5/5] ARM: dts: qcom: Add support for MBG TM for pm8775 on SA8775P

[Satya Priya Kakitapalli]

Add support for MBG TM peripheral for pm8775 sail pmics on SA8775P.

Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 120 ++++++++++++++++++++++++++++
 1 file changed, 120 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
index bd4f5f51e094..69910306885e 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
@@ -89,6 +89,62 @@ trip1 {
 				};
 			};
 		};
+
+		pmm8654au_0_mbg_tm: pmm8654au_0_mbg_tz {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_0_tz>;
+
+			trips {
+				trip0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pmm8654au_1_mbg_tm: pmm8654au_1_mbg_tz {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_1_tz>;
+
+			trips {
+				trip0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pmm8654au_2_mbg_tm: pmm8654au_2_mbg_tz {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_2_tz>;
+
+			trips {
+				trip0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pmm8654au_3_mbg_tm: pmm8654au_3_mbg_tz {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_3_tz>;
+
+			trips {
+				trip0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
 	};
 
 	reboot-mode {
@@ -180,6 +236,22 @@ reboot_reason: reboot-reason@48 {
 		};
 	};
 
+	pmm8654au_sail_0: pmic@1 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_0_tz: qcom,mbg-tm@d700 {
+			compatible = "qcom,spmi-mgb-tm";
+			reg = <0xd700>;
+			io-channels = <&pmm8654au_0_adc PM8775_ADC5_GEN3_DIE_TEMP(0)>;
+			io-channel-names = "thermal";
+			interrupts-extended = <&spmi_bus 0x1 0xd7 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
 	pmm8654au_1: pmic@2 {
 		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
 		reg = <0x2 SPMI_USID>;
@@ -226,6 +298,22 @@ pmm8654au_1_gpios: gpio@8800 {
 		};
 	};
 
+	pmm8654au_sail_1: pmic@3 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_1_tz: qcom,mbg-tm@d700 {
+			compatible = "qcom,spmi-mgb-tm";
+			reg = <0xd700>;
+			io-channels = <&pmm8654au_1_adc PM8775_ADC5_GEN3_DIE_TEMP(2)>;
+			io-channel-names = "thermal";
+			interrupts-extended = <&spmi_bus 0x3 0xd7 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
 	pmm8654au_2: pmic@4 {
 		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
 		reg = <0x4 SPMI_USID>;
@@ -272,6 +360,22 @@ pmm8654au_2_gpios: gpio@8800 {
 		};
 	};
 
+	pmm8654au_sail_2: pmic@5 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_2_tz: qcom,mbg-tm@d700 {
+			compatible = "qcom,spmi-mgb-tm";
+			reg = <0xd700>;
+			io-channels = <&pmm8654au_2_adc PM8775_ADC5_GEN3_DIE_TEMP(4)>;
+			io-channel-names = "thermal";
+			interrupts-extended = <&spmi_bus 0x5 0xd7 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
 	pmm8654au_3: pmic@6 {
 		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
 		reg = <0x6 SPMI_USID>;
@@ -317,4 +421,20 @@ pmm8654au_3_gpios: gpio@8800 {
 			#interrupt-cells = <2>;
 		};
 	};
+
+	pmm8654au_sail_3: pmic@7 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x7 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_3_tz: qcom,mbg-tm@d700 {
+			compatible = "qcom,spmi-mgb-tm";
+			reg = <0xd700>;
+			io-channels = <&pmm8654au_3_adc PM8775_ADC5_GEN3_DIE_TEMP(6)>;
+			io-channel-names = "thermal";
+			interrupts-extended = <&spmi_bus 0x7 0xd7 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
 };

-- 
2.25.1