Re: [PATCH 2/2] phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY

[Krzysztof Kozlowski]

On 29/07/2024 08:15, hpchen0 wrote:
> Nuvoton MA35 SoCs support DWC2 USB controller.
> Add the driver to drive the USB 2.0 PHY transceivers.
> 
> Signed-off-by: hpchen0 <hpchen0nvt@xxxxxxxxx>

> +
> +	ret = clk_prepare_enable(p_phy->clk);
> +	if (ret < 0) {
> +		dev_err(p_phy->dev, "Failed to enable PHY clock: %d\n", ret);
> +		return ret;
> +	}
> +
> +	regmap_read(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, &val);
> +	if (val & PHY0SUSPEND) {
> +		/*
> +		 * USB PHY0 is in operation mode already
> +		 * make sure USB PHY 60 MHz UTMI Interface Clock ready
> +		 */
> +		timeout = jiffies + msecs_to_jiffies(200);
> +		while (time_before(jiffies, timeout)) {
> +			regmap_read(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, &val);
> +			if (val & PHY0DEVCKSTB)
> +				return 0;
> +			usleep_range(1000, 1500);
> +		}

You want some readl_poll_timeout version here.

> +	}
> +
> +	/*
> +	 * reset USB PHY0.
> +	 * wait until USB PHY0 60 MHz UTMI Interface Clock ready
> +	 */
> +	regmap_update_bits(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, 0x7, (PHY0POR | PHY0SUSPEND));
> +	timeout = jiffies + msecs_to_jiffies(200);
> +	while (time_before(jiffies, timeout)) {
> +		regmap_read(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, &val);
> +		if (val & PHY0DEVCKSTB)
> +			break;
> +		usleep_range(1000, 1500);
> +	}
> +
> +	/* make USB PHY0 enter operation mode */
> +	regmap_update_bits(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, 0x7, PHY0SUSPEND);
> +
> +	/* make sure USB PHY 60 MHz UTMI Interface Clock ready */
> +	timeout = jiffies + msecs_to_jiffies(200);
> +	while (time_before(jiffies, timeout)) {
> +		regmap_read(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, &val);
> +		if (val & PHY0DEVCKSTB)
> +			return 0;
> +		usleep_range(1000, 1500);
> +	}
> +
> +	dev_err(p_phy->dev, "Timed out waiting for PHY to power on\n");
> +	ret = -ETIMEDOUT;
> +
> +	clk_disable_unprepare(p_phy->clk);
> +	return ret;
> +}
> +
> +static int ma35_usb_phy_power_off(struct phy *phy)
> +{
> +	struct ma35_usb_phy *p_phy = phy_get_drvdata(phy);
> +
> +	clk_disable_unprepare(p_phy->clk);
> +	return 0;
> +}
> +
> +static const struct phy_ops ma35_usb_phy_ops = {
> +	.power_on = ma35_usb_phy_power_on,
> +	.power_off = ma35_usb_phy_power_off,
> +	.owner = THIS_MODULE,
> +};
> +
> +static int ma35_usb_phy_probe(struct platform_device *pdev)
> +{
> +	struct phy_provider *provider;
> +	struct ma35_usb_phy *p_phy;
> +	const char *clkgate;
> +	struct phy *phy;
> +
> +	p_phy = devm_kzalloc(&pdev->dev, sizeof(*p_phy), GFP_KERNEL);
> +	if (!p_phy)
> +		return -ENOMEM;
> +
> +	p_phy->dev = &pdev->dev;
> +	platform_set_drvdata(pdev, p_phy);
> +
> +	p_phy->sysreg = syscon_regmap_lookup_by_phandle(p_phy->dev->of_node, "nuvoton,sys");
> +	if (IS_ERR(p_phy->sysreg))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(p_phy->sysreg),
> +				     "Failed to get SYS registers\n");
> +
> +	/* enable clock */
> +	of_property_read_string(p_phy->dev->of_node, "clock-enable", &clkgate);

There is no such property.

> +	p_phy->clk = devm_clk_get(p_phy->dev, clkgate);

Don't mix styles of variables: you were using pdev->dev but now entirely
different. Stick to pdev->dev.

> +	if (IS_ERR(p_phy->clk))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(p_phy->clk),

And here again pdev->dev... Bring some consistency, not random coding style.

> +				     "Failed to get usb_phy clock\n");
> +


Best regards,
Krzysztof