[net-next,v4] net: phy: phy_device: fix PHY WOL enabled, PM failed to suspend

From: Youwan Wang
Date: Wed Jul 31 2024 - 05:16:26 EST


If the PHY of the mido bus is enabled with Wake-on-LAN (WOL),
we cannot suspend the PHY. Although the WOL status has been
checked in phy_suspend(), returning -EBUSY(-16) would cause
the Power Management (PM) to fail to suspend. Since
phy_suspend() is an exported symbol (EXPORT_SYMBOL),
timely error reporting is needed. Therefore, an additional
check is performed here. If the PHY of the mido bus is enabled
with WOL, we skip calling phy_suspend() to avoid PM failure.

>From the following logs, it has been observed that the phydev->attached_dev
is NULL, phydev is "stmmac-0:01", it not attached, but it will affect suspend
and resume.The actually attached "stmmac-0:00" will not dpm_run_callback():
mdio_bus_phy_suspend().

init log:
[ 5.932502] YT8521 Gigabit Ethernet stmmac-0:00: attached PHY driver
(mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 5.932512] YT8521 Gigabit Ethernet stmmac-0:01: attached PHY driver
(mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[ 24.566289] YT8521 Gigabit Ethernet stmmac-0:00: yt8521_read_status,
link down, media: UTP

suspend log:
[ 322.631362] OOM killer disabled.
[ 322.631364] Freezing remaining freezable tasks
[ 322.632536] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 322.632540] printk: Suspending console(s) (use no_console_suspend to debug)
[ 322.633052] YT8521 Gigabit Ethernet stmmac-0:01:
PM: dpm_run_callback(): mdio_bus_phy_suspend+0x0/0x110 [libphy] returns -16
[ 322.633071] YT8521 Gigabit Ethernet stmmac-0:01:
PM: failed to suspend: error -16
[ 322.669699] PM: Some devices failed to suspend, or early wake event detected
[ 322.669949] OOM killer enabled.
[ 322.669951] Restarting tasks ... done.
[ 322.671008] random: crng reseeded on system resumption
[ 322.671014] PM: suspend exit

Add a function that phylib can inquire of the driver whether WoL
has been enabled at the PHY.

Signed-off-by: Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx>
Signed-off-by: Youwan Wang <youwan@xxxxxxxxxxxx>
Reviewed-by: Wojciech Drewek <wojciech.drewek@xxxxxxxxx>
---
drivers/net/phy/phy_device.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 7752e9386b40..34752a87f98f 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -279,6 +279,15 @@ static struct phy_driver genphy_driver;
static LIST_HEAD(phy_fixup_list);
static DEFINE_MUTEX(phy_fixup_lock);

+static bool phy_drv_wol_enabled(struct phy_device *phydev)
+{
+ struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
+
+ phy_ethtool_get_wol(phydev, &wol);
+
+ return wol.wolopts != 0;
+}
+
static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
{
struct device_driver *drv = phydev->mdio.dev.driver;
@@ -288,6 +297,12 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
if (!drv || !phydrv->suspend)
return false;

+ /* If the PHY on the mido bus is not attached but has WOL enabled
+ * we cannot suspend the PHY.
+ */
+ if (!netdev && phy_drv_wol_enabled(phydev))
+ return false;
+
/* PHY not attached? May suspend if the PHY has not already been
* suspended as part of a prior call to phy_disconnect() ->
* phy_detach() -> phy_suspend() because the parent netdev might be the
@@ -1975,7 +1990,6 @@ EXPORT_SYMBOL(phy_detach);

int phy_suspend(struct phy_device *phydev)
{
- struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
struct net_device *netdev = phydev->attached_dev;
const struct phy_driver *phydrv = phydev->drv;
int ret;
@@ -1983,8 +1997,7 @@ int phy_suspend(struct phy_device *phydev)
if (phydev->suspended || !phydrv)
return 0;

- phy_ethtool_get_wol(phydev, &wol);
- phydev->wol_enabled = wol.wolopts ||
+ phydev->wol_enabled = phy_drv_wol_enabled(phydev) ||
(netdev && netdev->ethtool->wol_enabled);
/* If the device has WOL enabled, we cannot suspend the PHY */
if (phydev->wol_enabled && !(phydrv->flags & PHY_ALWAYS_CALL_SUSPEND))
--
2.25.1