From: Sava Jakovljev <savaj@xxxxxxxxxxxxxx>
The current implementation incorrectly sets the mode bit of the PHY chip.
Bit 15 (RTL8211F_LEDCR_MODE) should not be shifted together with the
configuration nibble of a LED- it should be set independently of the
index of the LED being configured.
As a consequence, the RTL8211F LED control is actually operating in Mode A.
Fix the error by or-ing final register value to write with a const-value of
RTL8211F_LEDCR_MODE, thus setting Mode bit explicitly.
Fixes: 17784801d888 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F")
Signed-off-by: Sava Jakovljev <savaj@xxxxxxxxxxxxxx>
---
drivers/net/phy/realtek.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 87865918dab6..25e5bfbb6f89 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -555,7 +555,7 @@ static int rtl8211f_led_hw_control_set(struct phy_device *phydev, u8 index,
unsigned long rules)
{
const u16 mask = RTL8211F_LEDCR_MASK << (RTL8211F_LEDCR_SHIFT * index);
- u16 reg = RTL8211F_LEDCR_MODE; /* Mode B */
+ u16 reg = 0;
if (index >= RTL8211F_LED_COUNT)
return -EINVAL;
@@ -575,6 +575,7 @@ static int rtl8211f_led_hw_control_set(struct phy_device *phydev, u8 index,
}
reg <<= RTL8211F_LEDCR_SHIFT * index;
+ reg |= RTL8211F_LEDCR_MODE; /* Mode B */