RE: [PATCH v2 2/3] clk: renesas: r9a08g045: Mark the watchdog and always-on PM domains as IRQ safe

From: Biju Das
Date: Thu Aug 29 2024 - 11:59:10 EST


Hi Geert,

> -----Original Message-----
> From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> Sent: Thursday, August 29, 2024 1:45 PM
> Subject: Re: [PATCH v2 2/3] clk: renesas: r9a08g045: Mark the watchdog and always-on PM domains as IRQ
> safe
>
> Hi Claudiu,
>
> On Wed, Aug 28, 2024 at 4:06 PM Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
> > From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> >
> > If the watchdog is part of a dedicated power domain (as it may be on
> > RZ/G3S) the watchdog PM domain need to be powered on in the watchdog
> > restart handler. Currently, only the clocks are enabled in the
> > watchdog restart handler. To be able to also power on the PM domain we
> > need to call pm_runtime_resume_and_get() on the watchdog restart
> > handler, mark the watchdog device as IRQ safe and register the
> > watchdog PM domain with GENPD_FLAG_IRQ_SAFE.
> >
> > Register watchdog PM domain as IRQ safe. Along with it the always-on
> > PM domain (parent of the watchdog domain) was marked as IRQ safe.
> >
> > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> > ---
> >
> > Changes in v2:
> > - changed patch title; it was "clk: renesas: rzg2l-cpg: Mark
> > watchdog and always-on PM domains as IRQ safe"
>
> Thanks for the update!
>
> > --- a/drivers/clk/renesas/r9a08g045-cpg.c
> > +++ b/drivers/clk/renesas/r9a08g045-cpg.c
> > @@ -259,7 +259,7 @@ static const struct rzg2l_cpg_pm_domain_init_data r9a08g045_pm_domains[] = {
> > /* Keep always-on domain on the first position for proper domains registration. */
> > DEF_PD("always-on", R9A08G045_PD_ALWAYS_ON,
> > DEF_REG_CONF(0, 0),
> > - GENPD_FLAG_ALWAYS_ON),
> > + GENPD_FLAG_ALWAYS_ON |
> > + GENPD_FLAG_IRQ_SAFE),
> > DEF_PD("gic", R9A08G045_PD_GIC,
> > DEF_REG_CONF(CPG_BUS_ACPU_MSTOP, BIT(3)),
> > GENPD_FLAG_ALWAYS_ON), @@ -270,7
> > +270,8 @@ static const struct rzg2l_cpg_pm_domain_init_data r9a08g045_pm_domains[] = {
> > DEF_REG_CONF(CPG_BUS_REG1_MSTOP, GENMASK(3, 0)),
> > GENPD_FLAG_ALWAYS_ON),
> > DEF_PD("wdt0", R9A08G045_PD_WDT0,
> > - DEF_REG_CONF(CPG_BUS_REG0_MSTOP, BIT(0)), 0),
> > + DEF_REG_CONF(CPG_BUS_REG0_MSTOP, BIT(0)),
> > + GENPD_FLAG_IRQ_SAFE),
> > DEF_PD("sdhi0", R9A08G045_PD_SDHI0,
> > DEF_REG_CONF(CPG_BUS_PERI_COM_MSTOP, BIT(0)), 0),
> > DEF_PD("sdhi1", R9A08G045_PD_SDHI1,
>
> Can't you just do this for all domains (e.g. in rzg2l_cpg_pd_setup()), instead of limiting this to the
> wdt0 and always-on domains?

Not sure, that will make all PM calls for all domains with interrupt disabled??

Cheers,
Biju