Re: [PATCH v2 2/3] clk: renesas: r9a08g045: Mark the watchdog and always-on PM domains as IRQ safe

[claudiu beznea]

Hi, Geert,

On 29.08.2024 15:45, Geert Uytterhoeven wrote:
> Hi Claudiu,
> 
> On Wed, Aug 28, 2024 at 4:06 PM Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
>> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>>
>> If the watchdog is part of a dedicated power domain (as it may be on
>> RZ/G3S) the watchdog PM domain need to be powered on in the watchdog
>> restart handler. Currently, only the clocks are enabled in the watchdog
>> restart handler. To be able to also power on the PM domain we need to
>> call pm_runtime_resume_and_get() on the watchdog restart handler, mark
>> the watchdog device as IRQ safe and register the watchdog PM domain
>> with GENPD_FLAG_IRQ_SAFE.
>>
>> Register watchdog PM domain as IRQ safe. Along with it the always-on
>> PM domain (parent of the watchdog domain) was marked as IRQ safe.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>> ---
>>
>> Changes in v2:
>> - changed patch title; it was "clk: renesas: rzg2l-cpg: Mark
>>   watchdog and always-on PM domains as IRQ safe"
> 
> Thanks for the update!
> 
>> --- a/drivers/clk/renesas/r9a08g045-cpg.c
>> +++ b/drivers/clk/renesas/r9a08g045-cpg.c
>> @@ -259,7 +259,7 @@ static const struct rzg2l_cpg_pm_domain_init_data r9a08g045_pm_domains[] = {
>>         /* Keep always-on domain on the first position for proper domains registration. */
>>         DEF_PD("always-on",     R9A08G045_PD_ALWAYS_ON,
>>                                 DEF_REG_CONF(0, 0),
>> -                               GENPD_FLAG_ALWAYS_ON),
>> +                               GENPD_FLAG_ALWAYS_ON | GENPD_FLAG_IRQ_SAFE),
>>         DEF_PD("gic",           R9A08G045_PD_GIC,
>>                                 DEF_REG_CONF(CPG_BUS_ACPU_MSTOP, BIT(3)),
>>                                 GENPD_FLAG_ALWAYS_ON),
>> @@ -270,7 +270,8 @@ static const struct rzg2l_cpg_pm_domain_init_data r9a08g045_pm_domains[] = {
>>                                 DEF_REG_CONF(CPG_BUS_REG1_MSTOP, GENMASK(3, 0)),
>>                                 GENPD_FLAG_ALWAYS_ON),
>>         DEF_PD("wdt0",          R9A08G045_PD_WDT0,
>> -                               DEF_REG_CONF(CPG_BUS_REG0_MSTOP, BIT(0)), 0),
>> +                               DEF_REG_CONF(CPG_BUS_REG0_MSTOP, BIT(0)),
>> +                               GENPD_FLAG_IRQ_SAFE),
>>         DEF_PD("sdhi0",         R9A08G045_PD_SDHI0,
>>                                 DEF_REG_CONF(CPG_BUS_PERI_COM_MSTOP, BIT(0)), 0),
>>         DEF_PD("sdhi1",         R9A08G045_PD_SDHI1,
> 
> Can't you just do this for all domains (e.g. in rzg2l_cpg_pd_setup()),
> instead of limiting this to the wdt0 and always-on domains?

I thought about it but this, too, but I wasn't sure about the behavior of
the currently unexplored drivers for RZ/G3S. AFAICT from the current code
investigation, if this approach is implemented we need to be sure there is
no sleeping in drivers runtime PM APIs.

Thank you,
Claudiu Beznea

> 
> Gr{oetje,eeting}s,
> 
>                         Geert
>