Re: [PATCH v5 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices

[Krzysztof Kozlowski]

On Mon, Sep 02, 2024 at 08:42:20PM +0200, Vasileios Amoiridis wrote:
> Add interrupt options for BMP3xx and BMP5xx devices as well.
> 
> Signed-off-by: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
> ---
>  .../bindings/iio/pressure/bmp085.yaml         | 22 ++++++++++++++++++-
>  1 file changed, 21 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> index 6fda887ee9d4..20b75865e02f 100644
> --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> @@ -48,14 +48,34 @@ properties:
>  
>    interrupts:
>      description:
> -      interrupt mapping for IRQ (BMP085 only)
> +      interrupt mapping for IRQ. Supported in BMP085, BMP3xx, BMP5xx
>      maxItems: 1
>  
> +  drive-open-drain:
> +    description:
> +      set if the interrupt pin should be configured as open drain.
> +      If not set, defaults to push-pull configuration.
> +    type: boolean
> +
> +

Just one blank liine.

>  required:
>    - compatible
>    - vddd-supply
>    - vdda-supply
>  
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          not:
> +            enum:
> +              - bosch,bmp085
> +              - bosch,bmp380
> +              - bosch,bmp580

Are you sure you tested this patch?

Best regards,
Krzysztof