Re: [PATCH v5 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices

[Vasileios Amoiridis]

On Tue, Sep 03, 2024 at 08:34:22AM +0200, Krzysztof Kozlowski wrote:
> On Mon, Sep 02, 2024 at 08:42:20PM +0200, Vasileios Amoiridis wrote:
> > Add interrupt options for BMP3xx and BMP5xx devices as well.
> > 
> > Signed-off-by: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
> > ---
> >  .../bindings/iio/pressure/bmp085.yaml         | 22 ++++++++++++++++++-
> >  1 file changed, 21 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> > index 6fda887ee9d4..20b75865e02f 100644
> > --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> > +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> > @@ -48,14 +48,34 @@ properties:
> >  
> >    interrupts:
> >      description:
> > -      interrupt mapping for IRQ (BMP085 only)
> > +      interrupt mapping for IRQ. Supported in BMP085, BMP3xx, BMP5xx
> >      maxItems: 1
> >  
> > +  drive-open-drain:
> > +    description:
> > +      set if the interrupt pin should be configured as open drain.
> > +      If not set, defaults to push-pull configuration.
> > +    type: boolean
> > +
> > +
> 
> Just one blank liine.
> 

Hi Krzysztof,

Thanks for the review. I can change that.

> >  required:
> >    - compatible
> >    - vddd-supply
> >    - vdda-supply
> >  
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          not:
> > +            enum:
> > +              - bosch,bmp085
> > +              - bosch,bmp380
> > +              - bosch,bmp580
> 
> Are you sure you tested this patch?
> 

Well, before I run only make dt_binding_check but with the option
make dtbs_check I now found what you meant. I think I miss a 
"contains" here. In any case, make dtbs_check showed some other
warnings as well which I will address in a follow-up series.

> Best regards,
> Krzysztof
> 

Cheers,
Vasilis