Re: [PATCH 1/2] dt-bindings: iio: imu: add bmi270 bindings

[Alex Lanzano]

On Mon, Sep 02, 2024 at 09:21:33AM GMT, Krzysztof Kozlowski wrote:
> On Sun, Sep 01, 2024 at 04:53:23PM -0400, Alex Lanzano wrote:
> > Add device tree bindings for the bmi270 IMU
> > 
> > Signed-off-by: Alex Lanzano <lanzano.alex@xxxxxxxxx>
> > ---
> >  .../bindings/iio/imu/bosch,bmi270.yaml        | 80 +++++++++++++++++++
> >  1 file changed, 80 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml
> > new file mode 100644
> > index 000000000000..44534ef36378
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml
> > @@ -0,0 +1,80 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/imu/bosch,bmi270.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Bosch BMI270 6-Axis IMU
> > +
> > +maintainers:
> > +  - Alex Lanzano <lanzano.alex@xxxxxxxxx>
> > +
> > +description: |
> > +  BMI270 is a 6-axis inertial measurement unit that can measure acceleration and
> > +  angular velocity. The sensor also supports configurable interrupt events such
> > +  as motion, step counter, and wrist motion gestures. The sensor can communicate
> > +  I2C or SPI.
> > +  https://www.bosch-sensortec.com/products/motion-sensors/imus/bmi270/
> > +
> > +properties:
> > +  compatible:
> > +    const: bosch,bmi270
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  vdd-supply: true
> > +  vddio-supply: true
> > +
> > +  interrupts:
> > +    minItems: 1
> > +    maxItems: 2
> > +
> > +  interrupt-names:
> > +    minItems: 1
> > +    maxItems: 2
> > +    items:
> > +      enum:
> > +        - INT1
> > +        - INT2
> > +
> > +  drive-open-drain:
> > +    description:
> > +      set if the specified interrupt pin should be configured as
> > +      open drain. If not set, defaults to push-pull.
> > +
> > +  mount-matrix:
> > +    description:
> > +      an optional 3x3 mounting rotation matrix.
> > +
> > +required:
> > +  - compatible
> > +  - reg
> 
> Device can operate without power provided?
> 

Will fix!

> > +
> > +allOf:
> > +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    i2c {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        imu@68 {
> > +            compatible = "bosch,bmi270";
> > +            reg = <0x68>;
> > +        };
> > +    };
> 
> Keep just one, complete example. You miss here several properties.
> 
> > +  - |
> > +    spi {
> 
> Not much differences in this example, but if you want to keep it, then
> make it complete and fix the node name,
> 
> Node names should be generic. See also an explanation and list of
> examples (not exhaustive) in DT specification:
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> 
> Best regards,
> Krzysztof
> 

I'll make more complete examples in v2. Thank you for the review! Much
appreciated.