Re: [PATCH V2 1/2] firmware: arm_scmi: Ensure that the message-id supports fastchannel

[Cristian Marussi]

On Wed, Sep 04, 2024 at 01:38:55PM +0100, Sudeep Holla wrote:
> On Wed, Sep 04, 2024 at 01:29:29PM +0200, Konrad Dybcio wrote:
> > On 4.09.2024 9:00 AM, Johan Hovold wrote:
> 
> [...]
> 
> > >
> > > Unfortunately, this patch breaks resume from suspend on the x1e80100 crd:
> > >
> > >         [   26.919676] CPU4: Booted secondary processor 0x0000010000 [0x511f0011]
> > >         [   26.960607] arm-scmi firmware:scmi: timed out in resp(caller: do_xfer+0x164/0x568)
> > >         [   26.987142] cpufreq: cpufreq_online: ->get() failed
> > >
> > > and then the machine hangs (mostly, I saw an nvme timeout message after a
> > > while).
> > >
> > > Make sure you test suspend as well as some of the warnings I reported
> > > only show up during suspend.
> >
> > Eh it looks like PERF_LEVEL_GET (msgid 8) requires the use of FC, but
> > the firmware fails to inform us about it through BIT(0) in attrs..
> >
> 
> Just trying to understand things better here. So the firmware expects OSPM
> to just use FC only for PERF_LEVEL_GET and hence doesn't implement the
> default/normal channel for PERF_LEVEL_GET(I assume it returns error ?)
> but fails to set the attribute indicating FC is available for the domain.
> 

Is not that FCs are optional BUT PERF_LEVEL_GET standard messages is
support is mandatory by the spec anyway ?

Thanks,
Cristian