Re: [PATCH net-next v5 4/5] net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload

From: Roger Quadros
Date: Tue Sep 10 2024 - 14:07:35 EST




On 10/09/2024 20:52, Anwar, Md Danish wrote:
> Hi Roger,
>
> On 9/10/2024 11:08 PM, Roger Quadros wrote:
>>
>>
>> On 06/09/2024 14:15, MD Danish Anwar wrote:
>>> From: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
>>>
>>> The HSR stack allows to offload its Tx packet duplication functionality to
>>> the hardware. Enable this offloading feature for ICSSG driver. Add support
>>> to offload HSR Tx Tag Insertion and Rx Tag Removal and duplicate discard.
>>>
>>> Inorder to enable hsr-tag-ins-offload, hsr-dup-offload must also be enabled
>>
>> "In order"
>>
>>> as these are tightly coupled in the firmware implementation.
>>>
>>> Duplicate discard is done as part of RX tag removal and it is
>>> done by the firmware. When driver sends the r30 command
>>> ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE, firmware does RX tag removal as well as
>>> duplicate discard.
>>>
>>> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
>>> Signed-off-by: MD Danish Anwar <danishanwar@xxxxxx>
>>> ---
>>> drivers/net/ethernet/ti/icssg/icssg_common.c | 18 ++++++++++---
>>> drivers/net/ethernet/ti/icssg/icssg_config.c | 4 ++-
>>> drivers/net/ethernet/ti/icssg/icssg_config.h | 2 ++
>>> drivers/net/ethernet/ti/icssg/icssg_prueth.c | 28 +++++++++++++++++++-
>>> drivers/net/ethernet/ti/icssg/icssg_prueth.h | 3 +++
>>> 5 files changed, 50 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_common.c b/drivers/net/ethernet/ti/icssg/icssg_common.c
>>> index b9d8a93d1680..fdebeb2f84e0 100644
>>> --- a/drivers/net/ethernet/ti/icssg/icssg_common.c
>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_common.c
>>> @@ -660,14 +660,15 @@ enum netdev_tx icssg_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev
>>> {
>>> struct cppi5_host_desc_t *first_desc, *next_desc, *cur_desc;
>>> struct prueth_emac *emac = netdev_priv(ndev);
>>> + struct prueth *prueth = emac->prueth;
>>> struct netdev_queue *netif_txq;
>>> struct prueth_tx_chn *tx_chn;
>>> dma_addr_t desc_dma, buf_dma;
>>> + u32 pkt_len, dst_tag_id;
>>> int i, ret = 0, q_idx;
>>> bool in_tx_ts = 0;
>>> int tx_ts_cookie;
>>> void **swdata;
>>> - u32 pkt_len;
>>> u32 *epib;
>>>
>>> pkt_len = skb_headlen(skb);
>>> @@ -712,9 +713,20 @@ enum netdev_tx icssg_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev
>>>
>>> /* set dst tag to indicate internal qid at the firmware which is at
>>> * bit8..bit15. bit0..bit7 indicates port num for directed
>>> - * packets in case of switch mode operation
>>> + * packets in case of switch mode operation and port num 0
>>> + * for undirected packets in case of HSR offload mode
>>> */
>>> - cppi5_desc_set_tags_ids(&first_desc->hdr, 0, (emac->port_id | (q_idx << 8)));
>>> + dst_tag_id = emac->port_id | (q_idx << 8);
>>> +
>>> + if (prueth->is_hsr_offload_mode &&
>>> + (ndev->features & NETIF_F_HW_HSR_DUP))
>>> + dst_tag_id = PRUETH_UNDIRECTED_PKT_DST_TAG;
>>> +
>>> + if (prueth->is_hsr_offload_mode &&
>>> + (ndev->features & NETIF_F_HW_HSR_TAG_INS))
>>> + epib[1] |= PRUETH_UNDIRECTED_PKT_TAG_INS;
>>> +
>>> + cppi5_desc_set_tags_ids(&first_desc->hdr, 0, dst_tag_id);
>>> k3_udma_glue_tx_dma_to_cppi5_addr(tx_chn->tx_chn, &buf_dma);
>>> cppi5_hdesc_attach_buf(first_desc, buf_dma, pkt_len, buf_dma, pkt_len);
>>> swdata = cppi5_hdesc_get_swdata(first_desc);
>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.c b/drivers/net/ethernet/ti/icssg/icssg_config.c
>>> index 7b2e6c192ff3..72ace151d8e9 100644
>>> --- a/drivers/net/ethernet/ti/icssg/icssg_config.c
>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_config.c
>>> @@ -531,7 +531,9 @@ static const struct icssg_r30_cmd emac_r32_bitmask[] = {
>>> {{EMAC_NONE, 0xffff4000, EMAC_NONE, EMAC_NONE}}, /* Preemption on Tx ENABLE*/
>>> {{EMAC_NONE, 0xbfff0000, EMAC_NONE, EMAC_NONE}}, /* Preemption on Tx DISABLE*/
>>> {{0xffff0010, EMAC_NONE, 0xffff0010, EMAC_NONE}}, /* VLAN AWARE*/
>>> - {{0xffef0000, EMAC_NONE, 0xffef0000, EMAC_NONE}} /* VLAN UNWARE*/
>>> + {{0xffef0000, EMAC_NONE, 0xffef0000, EMAC_NONE}}, /* VLAN UNWARE*/
>>> + {{0xffff2000, EMAC_NONE, EMAC_NONE, EMAC_NONE}}, /* HSR_RX_OFFLOAD_ENABLE */
>>> + {{0xdfff0000, EMAC_NONE, EMAC_NONE, EMAC_NONE}} /* HSR_RX_OFFLOAD_DISABLE */
>>> };
>>>
>>> int icssg_set_port_state(struct prueth_emac *emac,
>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.h b/drivers/net/ethernet/ti/icssg/icssg_config.h
>>> index 1ac60283923b..92c2deaa3068 100644
>>> --- a/drivers/net/ethernet/ti/icssg/icssg_config.h
>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_config.h
>>> @@ -80,6 +80,8 @@ enum icssg_port_state_cmd {
>>> ICSSG_EMAC_PORT_PREMPT_TX_DISABLE,
>>> ICSSG_EMAC_PORT_VLAN_AWARE_ENABLE,
>>> ICSSG_EMAC_PORT_VLAN_AWARE_DISABLE,
>>> + ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE,
>>> + ICSSG_EMAC_HSR_RX_OFFLOAD_DISABLE,
>>> ICSSG_EMAC_PORT_MAX_COMMANDS
>>> };
>>>
>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>>> index 676168d6fded..9af06454ba64 100644
>>> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>>> @@ -41,7 +41,10 @@
>>> #define DEFAULT_PORT_MASK 1
>>> #define DEFAULT_UNTAG_MASK 1
>>>
>>> -#define NETIF_PRUETH_HSR_OFFLOAD_FEATURES NETIF_F_HW_HSR_FWD
>>> +#define NETIF_PRUETH_HSR_OFFLOAD_FEATURES (NETIF_F_HW_HSR_FWD | \
>>> + NETIF_F_HW_HSR_DUP | \
>>> + NETIF_F_HW_HSR_TAG_INS | \
>>> + NETIF_F_HW_HSR_TAG_RM)
>>>
>>> /* CTRLMMR_ICSSG_RGMII_CTRL register bits */
>>> #define ICSSG_CTRL_RGMII_ID_MODE BIT(24)
>>> @@ -758,6 +761,21 @@ static void emac_change_hsr_feature(struct net_device *ndev,
>>> }
>>> }
>>>
>>> +static netdev_features_t emac_ndo_fix_features(struct net_device *ndev,
>>> + netdev_features_t features)
>>> +{
>>> + /* In order to enable hsr tag insertion offload, hsr dup offload must
>>> + * also be enabled as these two are tightly coupled in firmware
>>> + * implementation.
>>> + */
>>> + if (features & NETIF_F_HW_HSR_TAG_INS)
>>> + features |= NETIF_F_HW_HSR_DUP;
>>
>> What if only NETIF_F_HW_HSR_DUP was set? Don't you have to set NETIF_F_HW_HSR_TAG_INS as well?
>>
>>> + else
>>> + features &= ~NETIF_F_HW_HSR_DUP;
>>
>> what if NETIF_F_HW_HSR_DUP was still set?
>>
>> I think you need to write a logic like follows.
>> if both are already cleared in ndev->features and any one is set in features you set both in features.
>> if both are already set in ndev->features and any one is cleared in features you clear both in features.
>>
>> is this reasonable?
>>
>
> Yes that does sound reasonable,
> How does below code look to you.
>
> if (!(ndev->features & NETIF_F_HW_HSR_DUP) &&
> !(ndev->features & NETIF_F_HW_HSR_TAG_INS))

While this is OK. it could also be
if (!(ndev->features & (NETIF_F_HW_HSR_DUP | NETIF_F_HW_HSR_TAG_INS)))
Your choice.

> if ((features & NETIF_F_HW_HSR_DUP) ||
> (features & NETIF_F_HW_HSR_TAG_INS)) {
> features |= NETIF_F_HW_HSR_DUP;
> features |= NETIF_F_HW_HSR_TAG_INS;
how about one line?
features |= NETIF_F_HW_HSR_DUP | NETIF_F_HW_HSR_TAG_INS;
> }

then you can get rid of the braces.

>
> if ((ndev->features & NETIF_F_HW_HSR_DUP) &&
> (ndev->features & NETIF_F_HW_HSR_TAG_INS))
> if (!(features & NETIF_F_HW_HSR_DUP) ||
> !(features & NETIF_F_HW_HSR_TAG_INS)) {
> features &= ~NETIF_F_HW_HSR_DUP;
> features &= ~NETIF_F_HW_HSR_TAG_INS;

features &= ~(NETIF_F_HW_HSR_DUP | NETIF_F_HW_HSR_TAG_INS);

> }
>
>>> +
>>> + return features;
>>> +}
>>> +
>>> static int emac_ndo_set_features(struct net_device *ndev,
>>> netdev_features_t features)
>>> {
>>> @@ -780,6 +798,7 @@ static const struct net_device_ops emac_netdev_ops = {
>>> .ndo_eth_ioctl = icssg_ndo_ioctl,
>>> .ndo_get_stats64 = icssg_ndo_get_stats64,
>>> .ndo_get_phys_port_name = icssg_ndo_get_phys_port_name,
>>> + .ndo_fix_features = emac_ndo_fix_features,
>>> .ndo_set_features = emac_ndo_set_features,
>>> };
>>>
>>> @@ -1007,6 +1026,13 @@ static void icssg_change_mode(struct prueth *prueth)
>>>
>>> for (mac = PRUETH_MAC0; mac < PRUETH_NUM_MACS; mac++) {
>>> emac = prueth->emac[mac];
>>> + if (prueth->is_hsr_offload_mode) {
>>> + if (emac->ndev->features & NETIF_F_HW_HSR_TAG_RM)
>>> + icssg_set_port_state(emac, ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE);
>>> + else
>>> + icssg_set_port_state(emac, ICSSG_EMAC_HSR_RX_OFFLOAD_DISABLE);
>>> + }
>>> +
>>> if (netif_running(emac->ndev)) {
>>> icssg_fdb_add_del(emac, eth_stp_addr, prueth->default_vlan,
>>> ICSSG_FDB_ENTRY_P0_MEMBERSHIP |
>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>>> index a4b025fae797..bba6da2e6bd8 100644
>>> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>>> @@ -59,6 +59,9 @@
>>>
>>> #define IEP_DEFAULT_CYCLE_TIME_NS 1000000 /* 1 ms */
>>>
>>> +#define PRUETH_UNDIRECTED_PKT_DST_TAG 0
>>> +#define PRUETH_UNDIRECTED_PKT_TAG_INS BIT(30)
>>> +
>>> /* Firmware status codes */
>>> #define ICSS_HS_FW_READY 0x55555555
>>> #define ICSS_HS_FW_DEAD 0xDEAD0000 /* lower 16 bits contain error code */
>>
>

--
cheers,
-roger