[PATCH net 1/2] net: phy: aquantia: fix setting active_low bit

[Daniel Golle]

phy_modify_mmd was used wrongly in aqr_phy_led_active_low_set() resulting
in a no-op instead of setting the VEND1_GLOBAL_LED_DRIVE_VDD bit.
Correctly set VEND1_GLOBAL_LED_DRIVE_VDD bit.

Fixes: 61578f679378 ("net: phy: aquantia: add support for PHY LEDs")
Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
---
 drivers/net/phy/aquantia/aquantia_leds.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/aquantia/aquantia_leds.c b/drivers/net/phy/aquantia/aquantia_leds.c
index 0516ac02c3f81..201c8df93fad9 100644
--- a/drivers/net/phy/aquantia/aquantia_leds.c
+++ b/drivers/net/phy/aquantia/aquantia_leds.c
@@ -120,7 +120,8 @@ int aqr_phy_led_hw_control_set(struct phy_device *phydev, u8 index,
 int aqr_phy_led_active_low_set(struct phy_device *phydev, int index, bool enable)
 {
 	return phy_modify_mmd(phydev, MDIO_MMD_VEND1, AQR_LED_DRIVE(index),
-			      VEND1_GLOBAL_LED_DRIVE_VDD, enable);
+			      VEND1_GLOBAL_LED_DRIVE_VDD,
+			      enable ? VEND1_GLOBAL_LED_DRIVE_VDD : 0);
 }
 
 int aqr_phy_led_polarity_set(struct phy_device *phydev, int index, unsigned long modes)
-- 
2.46.1