Re: [PATCH v1 2/3] ARM: dts: aspeed: system1: Enable serial gpio0

From: Eddie James
Date: Tue Oct 01 2024 - 16:49:58 EST



On 10/1/24 14:17, Ninad Palsule wrote:
Enable serial GPIO0. Set number of GPIO lines to 128 and bus frequency
to 1MHz.


Reviewed-by: Eddie James <eajames@xxxxxxxxxxxxx>



Signed-off-by: Ninad Palsule <ninad@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
index 1cbf257fb0a0b..c0219167a337a 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
@@ -398,6 +398,12 @@ &emmc {
clk-phase-mmc-hs200 = <180>, <180>;
};
+&sgpiom0 {
+ status = "okay";
+ ngpios = <128>;
+ bus-frequency = <1000000>;
+};
+
&ibt {
status = "okay";
};