[PATCH v2 7/7] arm64: dts: qcom: qrb4210-rb2: add HDMI audio playback support
From: Alexey Klimov
Date: Tue Oct 01 2024 - 22:22:20 EST
Add sound node and dsp-related piece to enable HDMI audio
playback support on Qualcomm QRB4210 RB2 board. That is the
only sound output supported for now.
Signed-off-by: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 55 ++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index 7731681688d5..b8bc4452ca48 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -6,6 +6,8 @@
/dts-v1/;
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
#include <dt-bindings/usb/pd.h>
#include "sm4250.dtsi"
#include "pm6125.dtsi"
@@ -103,6 +105,51 @@ led-wlan {
};
};
+ sound {
+ compatible = "qcom,qrb4210-rb2-sndcard";
+ pinctrl-0 = <&lpi_i2s2_active>;
+ pinctrl-names = "default";
+ model = "Qualcomm-RB2-WSA8815-Speakers-DMIC0";
+ audio-routing = "MM_DL1", "MultiMedia1 Playback",
+ "MM_DL2", "MultiMedia2 Playback";
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ mm2-dai-link {
+ link-name = "MultiMedia2";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
+ };
+
+ mm3-dai-link {
+ link-name = "MultiMedia3";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
+ hdmi-dai-link {
+ link-name = "HDMI Playback";
+ cpu {
+ sound-dai = <&q6afedai SECONDARY_MI2S_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <<9611_codec 0>;
+ };
+ };
+ };
+
vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 {
compatible = "regulator-fixed";
regulator-name = "VREG_HDMI_OUT_1P2";
@@ -318,6 +365,14 @@ &pon_resin {
status = "okay";
};
+/* SECONDARY I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */
+&q6afedai {
+ dai@20 {
+ reg = <SECONDARY_MI2S_RX>;
+ qcom,sd-lines = <0>;
+ };
+};
+
&qupv3_id_0 {
status = "okay";
};
--
2.45.2