[PATCH] Input: zinitix - Don't fail if linux,keycodes prop is absent
From: Nikita Travkin
Date: Wed Oct 02 2024 - 09:18:20 EST
When initially adding the touchkey support, a mistake was made in the
property parsing code. The possible negative errno from
device_property_count_u32() was never checked, which was an oversight
left from converting to it from the of_property as part of the review
fixes.
Re-add the correct handling of the absent property, in which case zero
touchkeys should be assumed, which would disable the feature.
Reported-by: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
Tested-by: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
Fixes: 075d9b22c8fe ("Input: zinitix - add touchkey support")
Signed-off-by: Nikita Travkin <nikita@xxxxxxx>
---
drivers/input/touchscreen/zinitix.c | 33 ++++++++++++++++++++++-----------
1 file changed, 22 insertions(+), 11 deletions(-)
diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c
index 52b3950460e2..1f726653940c 100644
--- a/drivers/input/touchscreen/zinitix.c
+++ b/drivers/input/touchscreen/zinitix.c
@@ -645,19 +645,30 @@ static int zinitix_ts_probe(struct i2c_client *client)
return error;
}
- bt541->num_keycodes = device_property_count_u32(&client->dev, "linux,keycodes");
- if (bt541->num_keycodes > ARRAY_SIZE(bt541->keycodes)) {
- dev_err(&client->dev, "too many keys defined (%d)\n", bt541->num_keycodes);
- return -EINVAL;
+ error = device_property_count_u32(&client->dev, "linux,keycodes");
+ if (error == -EINVAL || error == -ENODATA) {
+ bt541->num_keycodes = 0;
+ } else if (error < 0) {
+ dev_err(&client->dev, "Failed to count \"linux,keycodes\" property: %d\n", error);
+ return error;
+ } else {
+ bt541->num_keycodes = error;
}
- error = device_property_read_u32_array(&client->dev, "linux,keycodes",
- bt541->keycodes,
- bt541->num_keycodes);
- if (error) {
- dev_err(&client->dev,
- "Unable to parse \"linux,keycodes\" property: %d\n", error);
- return error;
+ if (bt541->num_keycodes > 0) {
+ if (bt541->num_keycodes > ARRAY_SIZE(bt541->keycodes)) {
+ dev_err(&client->dev, "too many keys defined (%d)\n", bt541->num_keycodes);
+ return -EINVAL;
+ }
+
+ error = device_property_read_u32_array(&client->dev, "linux,keycodes",
+ bt541->keycodes,
+ bt541->num_keycodes);
+ if (error) {
+ dev_err(&client->dev,
+ "Unable to parse \"linux,keycodes\" property: %d\n", error);
+ return error;
+ }
}
error = zinitix_init_input_dev(bt541);
---
base-commit: fe21733536749bb1b31c9c84e0b8d2ab8d82ce13
change-id: 20241002-zinitix-no-keycodes-f0fe1bdaccb2
Best regards,
--
Nikita Travkin <nikita@xxxxxxx>