Re: [PATCH v2 0/4] arm64: dts: imx8mm-kontron: Add HDMI and LVDS display support

[Frieder Schrempf]

On 28.08.24 9:46 AM, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
> 
> This add support for the display bridges (DSI->LVDS and DSI->HDMI)
> on the BL i.MX8MM and the 7" LVDS panel in a separate overlay.
> 
> Only one of the interfaces (HDMI or LVDS) is supported at the same
> time. Enabling the LVDS overlay will disable the HDMI interface.
> 
> * Patch 1 and 2: Add the necessary binding changes
> * Patch 3: Extend the BL devicetree
> * Patch 4: Add the LVDS panel overlay
> 
> Changes for v2:
> * Patch 1: Add link to commit message
> * Patch 2: Add Conors A-b tag
> * Patch 3: Remove blank lines from hdmi node
> * Patch 3: Fix order of lvds and hdmi nodes within i2c
> * Patch 3: Remove the unneeded deletion of samsung,pll-clock-frequency
> * Patch 3: Use the existing MIPI DSI output port from imx8mm.dtsi
> * Patch 4: Update copyright year
> * Patch 4: Use exisitng MIPI DSI output port from imx8mm.dtsi
> * Patch 4: Fix pinctrl for GPIO hogs
> * Patch 4: Fix property order in i2c2 node
> * Patch 4: Use generic node name for touchscreen
> 
> Frieder Schrempf (4):
>   dt-bindings: vendor-prefixes: Add Jenson Display
>   dt-bindings: display: panel-lvds: Add compatible for Jenson
>     BL-JT60050-01A
>   arm64: dts: imx8mm-kontron: Add support for display bridges on BL
>     i.MX8MM
>   arm64: dts: imx8mm-kontron: Add DL (Display-Line) overlay with LVDS
>     support

Gentle ping for this series. Neil proposed to apply path 1 and 2 to
drm-misc-next. Shawn, can you review/apply patch 3 and 4, please?

Thanks
Frieder