[PATCH v2] arm64: dts: qcom: x1e80100: enable GICv3 ITS for PCIe
From: Johan Hovold
Date: Wed Oct 09 2024 - 12:27:37 EST
The DWC PCIe controller can be used with its internal MSI controller or
with an external one such as the GICv3 Interrupt Translation Service
(ITS).
Add the msi-map properties needed to use the GIC ITS. This will also
make Linux switch to the ITS implementation, which allows for assigning
affinity to individual MSIs. This specifically allows NVMe and Wi-Fi
interrupts to be processed on all cores (and not just on CPU0).
Note that using the GIC ITS on x1e80100 will cause Advanced Error
Reporting (AER) interrupts to be received on errors unlike when using
the internal MSI controller. Consequently, notifications about
(correctable) errors may now be logged for errors that previously went
unnoticed.
Also note that PCIe5 (and PCIe3) can currently only be used with the
internal MSI controller due to a platform (firmware) limitation.
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
The PCIe Gen4 stability fixes [1] are now in 6.12-rc1 so that we can enable
the GIC ITS without being flooded with link error notifications [2].
Johan
[1] https://lore.kernel.org/lkml/20240911-pci-qcom-gen4-stability-v7-0-743f5c1fd027@xxxxxxxxxx/
[2] https://lore.kernel.org/lkml/ZpDnSL8as7km9_0b@xxxxxxxxxxxxxxxxxxxx/
Changes in v2
- amend commit message with comment about PCIe3 and PCIe5 only
supporting the internal MSI controller
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 1743fe229ded..4d978fe936e5 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -2934,6 +2934,8 @@ pcie6a: pci@1bf8000 {
linux,pci-domain = <6>;
num-lanes = <4>;
+ msi-map = <0x0 &gic_its 0xe0000 0x10000>;
+
interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>,
@@ -3183,6 +3185,8 @@ pcie4: pci@1c08000 {
linux,pci-domain = <4>;
num-lanes = <2>;
+ msi-map = <0x0 &gic_its 0xc0000 0x10000>;
+
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
@@ -5773,8 +5777,6 @@ gic_its: msi-controller@17040000 {
msi-controller;
#msi-cells = <1>;
-
- status = "disabled";
};
};
--
2.45.2