Re: [PATCH v2 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300

From: Dmitry Baryshkov
Date: Sat Oct 26 2024 - 13:36:24 EST


On Fri, Oct 11, 2024 at 01:16:19PM +0530, Krishna Kurapati wrote:
> Enable primary USB controller on QCS8300 Ride platform. The primary USB
> controller is made "peripheral", as this is intended to be connected to
> a host for debugging use cases.
>
> Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> index 7eed19a694c3..3e925228379c 100644
> --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> @@ -265,3 +265,26 @@ &ufs_mem_phy {
> vdda-pll-supply = <&vreg_l5a>;
> status = "okay";
> };
> +
> +&usb_1_hsphy {
> + vdda-pll-supply = <&vreg_l7a>;
> + vdda18-supply = <&vreg_l7c>;
> + vdda33-supply = <&vreg_l9a>;
> +
> + status = "okay";
> +};
> +
> +&usb_qmpphy {
> + vdda-phy-supply = <&vreg_l7a>;
> + vdda-pll-supply = <&vreg_l5a>;
> +
> + status = "okay";
> +};
> +
> +&usb_1 {
> + status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> + dr_mode = "peripheral";
> +};

So, can it be used as a USB host controller / connector? What needs to
be done in such a case?

--
With best wishes
Dmitry