Re: [PATCH v3 1/2] vdpa/mlx5: Set speed and duplex of vDPA devices to UNKNOWN
From: Michael S. Tsirkin
Date: Fri Nov 08 2024 - 06:52:05 EST
On Fri, Nov 08, 2024 at 10:31:58AM +0100, Dragos Tatulea wrote:
>
>
> On 07.11.24 22:50, Michael S. Tsirkin wrote:
> > On Wed, Sep 04, 2024 at 10:11:14AM -0500, Carlos Bilbao wrote:
> >> From: Carlos Bilbao <cbilbao@xxxxxxxxxxxxxxxx>
> >>
> >> Initialize the speed and duplex fields in virtio_net_config to UNKNOWN.
> >> This is needed because mlx5_vdpa vDPA devices currently do not support the
> >> VIRTIO_NET_F_SPEED_DUPLEX feature which reports speed and duplex.
> >
> > I see no logic here. Without this feature bit, guests will not read
> > this field, why do we suddenly need to initialize it?
> >
> IIRC, Carlos was reading data via ioctl VHOST_VDPA_GET_CONFIG which calls
> .get_config() directly, always exposing the speed and duplex config fields [0].
> Carlos, was this the case?
>
> [0] https://lore.kernel.org/lkml/afcbf041-7613-48e6-8088-9d52edd907ff@xxxxxxxxxx/T/
>
> Thanks,
> Dragos
Basically, driver should ignore these if feature is not set.
> >> Add
> >> needed helper cpu_to_mlx5vdpa32() to convert endianness of speed.
> >>
> >> Signed-off-by: Carlos Bilbao <cbilbao@xxxxxxxxxxxxxxxx>
> >> Reviewed-by: Dragos Tatulea <dtatulea@xxxxxxxxxx>
> >> ---
> >> drivers/vdpa/mlx5/net/mlx5_vnet.c | 12 ++++++++++++
> >> 1 file changed, 12 insertions(+)
> >>
> >> diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> >> index b56aae3f7be3..41ca268d43ff 100644
> >> --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> >> +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> >> @@ -173,6 +173,11 @@ static __virtio16 cpu_to_mlx5vdpa16(struct mlx5_vdpa_dev *mvdev, u16 val)
> >> return __cpu_to_virtio16(mlx5_vdpa_is_little_endian(mvdev), val);
> >> }
> >>
> >> +static __virtio32 cpu_to_mlx5vdpa32(struct mlx5_vdpa_dev *mvdev, u32 val)
> >> +{
> >> + return __cpu_to_virtio32(mlx5_vdpa_is_little_endian(mvdev), val);
> >> +}
> >> +
> >> static u16 ctrl_vq_idx(struct mlx5_vdpa_dev *mvdev)
> >> {
> >> if (!(mvdev->actual_features & BIT_ULL(VIRTIO_NET_F_MQ)))
> >> @@ -3433,6 +3438,13 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
> >> init_rwsem(&ndev->reslock);
> >> config = &ndev->config;
> >>
> >> + /*
> >> + * mlx5_vdpa vDPA devices currently don't support reporting or
> >> + * setting the speed or duplex.
> >> + */
> >> + config->speed = cpu_to_mlx5vdpa32(mvdev, SPEED_UNKNOWN);
> >> + config->duplex = DUPLEX_UNKNOWN;
> >> +
> >> if (add_config->mask & BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MTU)) {
> >> err = config_func_mtu(mdev, add_config->net.mtu);
> >> if (err)
> >> --
> >> 2.34.1
> >