Re: [PATCH V2] ALSA: hda/conexant: fix Z60MR100 startup pop issue

From: Takashi Iwai
Date: Thu Nov 28 2024 - 02:13:50 EST


On Thu, 28 Nov 2024 07:08:12 +0100,
bo liu wrote:
>
> When Z60MR100 startup, speaker will output a pop. To fix this issue,
> we mute codec by init verbs in bios when system startup, and set GPIO
> to low to unmute codec in codec driver when it loaded .
>
> Signed-off-by: bo liu <bo.liu@xxxxxxxxxxxxxx>
> ---
> sound/pci/hda/patch_conexant.c | 35 ++++++++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
> index e851785ff058..62c53e64bcad 100644
> --- a/sound/pci/hda/patch_conexant.c
> +++ b/sound/pci/hda/patch_conexant.c
> @@ -42,6 +42,7 @@ struct conexant_spec {
> unsigned int gpio_led;
> unsigned int gpio_mute_led_mask;
> unsigned int gpio_mic_led_mask;
> + unsigned int gpio_unmute_bit_mask;
> bool is_cx8070_sn6140;
> };
>
> @@ -308,6 +309,7 @@ enum {
> CXT_FIXUP_HP_MIC_NO_PRESENCE,
> CXT_PINCFG_SWS_JS201D,
> CXT_PINCFG_TOP_SPEAKER,
> + CXT_FIXUP_HP_A_U,
> };
>
> /* for hda_fixup_thinkpad_acpi() */
> @@ -762,6 +764,24 @@ static void cxt_setup_mute_led(struct hda_codec *codec,
> }
> }
>
> +static void cxt_setup_mute_gpio_and_unmute(struct hda_codec *codec,
> + unsigned int gpio_mute_mask)
> +{
> + struct conexant_spec *spec = codec->spec;
> +
> + if (gpio_mute_mask) {
> + spec->gpio_unmute_bit_mask = gpio_mute_mask;

Any reason to store this in spec? As far as I see the code below,
it's used only locally here, so it doesn't have to be stored there.


> +
> + //set gpio data to 0.

Put a space after "//".

> + snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, 0);
> + snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_MASK,
> + spec->gpio_unmute_bit_mask);
> + snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DIRECTION,
> + spec->gpio_unmute_bit_mask);
> + snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_STICKY_MASK, 0);
> + }
> +}
> +
> static void cxt_fixup_mute_led_gpio(struct hda_codec *codec,
> const struct hda_fixup *fix, int action)
> {
> @@ -776,6 +796,15 @@ static void cxt_fixup_hp_zbook_mute_led(struct hda_codec *codec,
> cxt_setup_mute_led(codec, 0x10, 0x20);
> }
>
> +static void cxt_fixup_hp_a_u(struct hda_codec *codec,
> + const struct hda_fixup *fix, int action)
> +{
> + //Init vers in BIOS mute the spk/hp by set gpio high to avoid pop noise,
> + //so need to unmute once by clearing the gpio data when runs into the system.

Ditto.


thanks,

Takashi