[PATCH net] qca_spi: Fix clock speed for multiple QCA7000

[Stefan Wahren]

Storing the maximum clock speed in module parameter qcaspi_clkspeed
has the unintended side effect that the first probed instance
defines the value for all other instances. Fix this issue by storing
it in max_speed_hz of the relevant SPI device.

This fix keeps the priority of the speed parameter (module parameter,
device tree property, driver default).

Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx>
---
 drivers/net/ethernet/qualcomm/qca_spi.c | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index ef9c02b000e4..a79fd2d66534 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -909,17 +909,15 @@ qca_spi_probe(struct spi_device *spi)
 	legacy_mode = of_property_read_bool(spi->dev.of_node,
 					    "qca,legacy-mode");

-	if (qcaspi_clkspeed == 0) {
-		if (spi->max_speed_hz)
-			qcaspi_clkspeed = spi->max_speed_hz;
-		else
-			qcaspi_clkspeed = QCASPI_CLK_SPEED;
-	}
-
-	if ((qcaspi_clkspeed < QCASPI_CLK_SPEED_MIN) ||
-	    (qcaspi_clkspeed > QCASPI_CLK_SPEED_MAX)) {
-		dev_err(&spi->dev, "Invalid clkspeed: %d\n",
-			qcaspi_clkspeed);
+	if (qcaspi_clkspeed)
+		spi->max_speed_hz = qcaspi_clkspeed;
+	else if (!spi->max_speed_hz)
+		spi->max_speed_hz = QCASPI_CLK_SPEED;
+
+	if (spi->max_speed_hz < QCASPI_CLK_SPEED_MIN ||
+	    spi->max_speed_hz > QCASPI_CLK_SPEED_MAX) {
+		dev_err(&spi->dev, "Invalid clkspeed: %u\n",
+			spi->max_speed_hz);
 		return -EINVAL;
 	}

@@ -944,14 +942,13 @@ qca_spi_probe(struct spi_device *spi)
 		return -EINVAL;
 	}

-	dev_info(&spi->dev, "ver=%s, clkspeed=%d, burst_len=%d, pluggable=%d\n",
+	dev_info(&spi->dev, "ver=%s, clkspeed=%u, burst_len=%d, pluggable=%d\n",
 		 QCASPI_DRV_VERSION,
-		 qcaspi_clkspeed,
+		 spi->max_speed_hz,
 		 qcaspi_burst_len,
 		 qcaspi_pluggable);

 	spi->mode = SPI_MODE_3;
-	spi->max_speed_hz = qcaspi_clkspeed;
 	if (spi_setup(spi) < 0) {
 		dev_err(&spi->dev, "Unable to setup SPI device\n");
 		return -EFAULT;
--
2.34.1