Re: [PATCH v3 05/10] clk: renesas: r8a779h0: Add display clocks
From: Geert Uytterhoeven
Date: Mon Dec 09 2024 - 02:58:00 EST
Hi Tomi,
On Mon, Dec 9, 2024 at 6:26 AM Tomi Valkeinen
<tomi.valkeinen@xxxxxxxxxxxxxxxx> wrote:
> On 06/12/2024 15:43, Geert Uytterhoeven wrote:
> > On Fri, Dec 6, 2024 at 10:33 AM Tomi Valkeinen
> > <tomi.valkeinen@xxxxxxxxxxxxxxxx> wrote:
> >> From: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>
> >>
> >> Add display related clocks for DU, DSI, FCPVD, and VSPD.
> >>
> >> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>
> >> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> >> Tested-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> >
> > Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> > i.e. will queue in renesas-clk for v6.14.
> >
> >> --- a/drivers/clk/renesas/r8a779h0-cpg-mssr.c
> >> +++ b/drivers/clk/renesas/r8a779h0-cpg-mssr.c
> >> @@ -179,6 +179,9 @@ static const struct mssr_mod_clk r8a779h0_mod_clks[] __initconst = {
> >> DEF_MOD("canfd0", 328, R8A779H0_CLK_SASYNCPERD2),
> >> DEF_MOD("csi40", 331, R8A779H0_CLK_CSI),
> >> DEF_MOD("csi41", 400, R8A779H0_CLK_CSI),
> >> + DEF_MOD("dis0", 411, R8A779H0_CLK_S0D3),
> >> + DEF_MOD("dsitxlink0", 415, R8A779H0_CLK_DSIREF),
> >> + DEF_MOD("fcpvd0", 508, R8A779H0_CLK_S0D3),
> >> DEF_MOD("hscif0", 514, R8A779H0_CLK_SASYNCPERD1),
> >> DEF_MOD("hscif1", 515, R8A779H0_CLK_SASYNCPERD1),
> >> DEF_MOD("hscif2", 516, R8A779H0_CLK_SASYNCPERD1),
> >> @@ -227,6 +230,7 @@ static const struct mssr_mod_clk r8a779h0_mod_clks[] __initconst = {
> >> DEF_MOD("vin15", 811, R8A779H0_CLK_S0D4_VIO),
> >> DEF_MOD("vin16", 812, R8A779H0_CLK_S0D4_VIO),
> >> DEF_MOD("vin17", 813, R8A779H0_CLK_S0D4_VIO),
> >> + DEF_MOD("vspd0", 830, R8A779H0_CLK_S0D1_VIO),
> >> DEF_MOD("wdt1:wdt0", 907, R8A779H0_CLK_R),
> >> DEF_MOD("cmt0", 910, R8A779H0_CLK_R),
> >> DEF_MOD("cmt1", 911, R8A779H0_CLK_R),
> >
> > As mentioned by Laurent during his review on v1, all clock parents
> > should probably be some form of R8A779H0_CLK_S0Dx_VIO.
> > So I'm inclined to replace all of them by R8A779H0_CLK_VIOBUSD2 while
> > applying, which would match R-Car V4H.
>
> What do you mean with the above? First you say the clock parents should
> be some form of S0Dx_VIO, but then you say you'll use VIOBUSD2. Aren't
> those unrelated clocks, from different PLLs?
Oops, copy-'n-paste went wrong. I did mean R8A779H0_VIOBUSD*.
> > Are you OK with that?
>
> I'm fine with that. I can't really get much out of the docs wrt.
> clocking, and the clocks I used were from the BSP. Afaics, it looks
> similar to V4H, so it's probably best have the same clocks, as you suggest.
Agreed.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds