[PATCH v3 1/2] arm64: dts: qcom: qcs615: Add support for secondary USB node on QCS615

[Song Xue]

From: Krishna Kurapati <krishna.kurapati@xxxxxxxxxxxxxxxx>

Add support for secondary USB controller and its high-speed phy
on QCS615.

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Signed-off-by: Krishna Kurapati <krishna.kurapati@xxxxxxxxxxxxxxxx>
Co-developed-by: Song Xue <quic_songxue@xxxxxxxxxxx>
Signed-off-by: Song Xue <quic_songxue@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qcs615.dtsi | 78 ++++++++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
index b8388dcca94cd8f4e6f1360305d5f6c7fff4eec3..a5155e61f25dbfd819c67662ae471962d29d0b28 100644
--- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
@@ -3079,6 +3079,22 @@ usb_1_hsphy: phy@88e2000 {
 			status = "disabled";
 		};
 
+		usb_hsphy_2: phy@88e3000 {
+			compatible = "qcom,qcs615-qusb2-phy";
+			reg = <0x0 0x088e3000 0x0 0x180>;
+
+			clocks = <&gcc GCC_AHB2PHY_WEST_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb",
+				      "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		usb_qmpphy: phy@88e6000 {
 			compatible = "qcom,qcs615-qmp-usb3-phy";
 			reg = <0x0 0x88e6000 0x0 0x1000>;
@@ -3168,6 +3184,68 @@ usb_1_dwc3: usb@a600000 {
 				snps,usb3_lpm_capable;
 			};
 		};
+
+		usb_2: usb@a8f8800 {
+			compatible = "qcom,qcs615-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a8f8800 0x0 0x400>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB2_SEC_AXI_CLK>,
+				 <&gcc GCC_USB20_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB2_SEC_AXI_CLK>,
+				 <&gcc GCC_USB20_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB20_SEC_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB2_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB20_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB20_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 663 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq";
+
+			power-domains = <&gcc USB20_SEC_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB20_SEC_BCR>;
+
+			qcom,select-utmi-as-pipe-clk;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_2_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a800000 0x0 0xcd00>;
+
+				iommus = <&apps_smmu 0xe0 0x0>;
+				interrupts = <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>;
+
+				phys = <&usb_hsphy_2>;
+				phy-names = "usb2-phy";
+
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+
+				maximum-speed = "high-speed";
+			};
+		};
 	};
 
 	arch_timer: timer {

-- 
2.25.1