[PATCH 1/2] arm64: dts: qcom: sc8280xp-pmics: Fix slave ID in interrupts configuration

[Pengyu Luo]

According to the binding for qcom,spmi-pmic-arb, the cell 1 should be
slave id, the slave id of pmc8280_2 is 3.

Signed-off-by: Pengyu Luo <mitltlatltl@xxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index 1e3babf2e..c19fb9c39 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -212,7 +212,7 @@ pmc8280_2: pmic@3 {
 		pm8280_2_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
-			interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts-extended = <&spmi_bus 0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 			io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(3)>;
 			io-channel-names = "thermal";
 			#thermal-sensor-cells = <0>;
-- 
2.47.1