[PATCH 2/2] arm64: dts: qcom: sc8280xp-pmics: Add more temp-alarm devices

[Pengyu Luo]

There are 4 Qualcomm PMIC Die Temp Alarm Sensor Devices under windows os,
in separate dt files, pm8350c and pmr735a have already support temp alarm,
add the rest 2 devices for sc8280xp-pmic.

Temperature trip points are from dsdt(Temp. in tenths of degrees Kelvin).

example:
    Name (TPSV, 0x0E60) // 0x0E60 - 2730 = 950
    Method (_PSV, 0, NotSerialized)  // _PSV: Passive Temperature
    {
        Return (\_SB.TZ15.TPSV)
    }

    Name (TCRT, 0x0F28) // 0X0F28 - 2730 = 1150
    Method (_CRT, 0, NotSerialized)  // _CRT: Critical Temperature
    {
        Return (\_SB.TZ15.TCRT)
    }

Signed-off-by: Pengyu Luo <mitltlatltl@xxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 56 ++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index c19fb9c39..307df1d3d 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -32,6 +32,26 @@ trip1 {
 			};
 		};
 
+		pmc8280c_thermal: pmc8280c-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pmc8280c_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
 		pm8280_2_thermal: pm8280-2-thermal {
 			polling-delay-passive = <100>;
 
@@ -51,6 +71,26 @@ trip1 {
 				};
 			};
 		};
+
+		pmr735a_thermal: pmr735a-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pmr735a_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
 	};
 };
 
@@ -181,6 +221,13 @@ pmc8280c: pmic@2 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmc8280c_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		pmc8280c_gpios: gpio@8800 {
 			compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
@@ -235,6 +282,15 @@ pmr735a: pmic@4 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmr735a_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pmk8280_vadc PMR735A_ADC7_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
 		pmr735a_gpios: gpio@8800 {
 			compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
-- 
2.47.1