[PATCH 09/24] arm64: dts: qcom: msm8998: Use the header with DSI phy clock IDs

[Krzysztof Kozlowski]

Use the header with DSI phy clock IDs to make code more readable.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Depends on:
https://lore.kernel.org/all/20250127132105.107138-1-krzysztof.kozlowski@xxxxxxxxxx/
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index c2caad85c668df2ebe900bc560e39480ae03e353..7eca38440cd7ea60caa3e8467097aaf0d7928df5 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -2,6 +2,7 @@
 /* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8998.h>
 #include <dt-bindings/clock/qcom,gpucc-msm8998.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
@@ -2790,10 +2791,10 @@ mmcc: clock-controller@c8c0000 {
 				      "gpll0_div";
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&gcc GCC_MMSS_GPLL0_CLK>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi1_phy 1>,
-				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
 				 <&mdss_hdmi_phy 0>,
 				 <0>,
 				 <0>,
@@ -2932,8 +2933,8 @@ mdss_dsi0: dsi@c994000 {
 					      "bus";
 				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
 						  <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd MSM8998_VDDCX>;
@@ -3008,8 +3009,8 @@ mdss_dsi1: dsi@c996000 {
 					      "bus";
 				assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
 						  <&mmcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd MSM8998_VDDCX>;

-- 
2.43.0