[PATCH 10/24] arm64: dts: qcom: qcm2290: Use the header with DSI phy clock IDs

[Krzysztof Kozlowski]

Use the header with DSI phy clock IDs to make code more readable.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Depends on:
https://lore.kernel.org/all/20250127132105.107138-1-krzysztof.kozlowski@xxxxxxxxxx/
---
 arch/arm64/boot/dts/qcom/qcm2290.dtsi | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index f0746123e594d5ce5cc314c956eaca11556a9211..9000ae15a3994ea388fde9f4ca21977f58a2c60b 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -6,6 +6,7 @@
  */
 
 #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
 #include <dt-bindings/clock/qcom,qcm2290-gpucc.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
@@ -1702,8 +1703,8 @@ mdss_dsi0: dsi@5e94000 {
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd QCM2290_VDDCX>;
@@ -1785,8 +1786,8 @@ dispcc: clock-controller@5f00000 {
 				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>;
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 			clock-names = "bi_tcxo",
 				      "bi_tcxo_ao",
 				      "gcc_disp_gpll0_clk_src",

-- 
2.43.0